Strumenti necessari in questo Smontaggio

Introduzione

This is a quick teardown of the playstation move controller.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo PlayStation Move, usa il nostro manuale di assistenza.

Playstation Move Controller
  • Playstation Move Controller

Aggiungi Commento

Remove the 4 screws holding the back over and trigger button on.
  • Remove the 4 screws holding the back over and trigger button on.

Aggiungi Commento

Once open you will see two ribbon cables. The one connected to the trigger button is removable.
  • Once open you will see two ribbon cables.

  • The one connected to the trigger button is removable.

  • The ribbon cable attached to light globe is soldered on.

Aggiungi Commento

Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated.
  • Light Globe Cover and the LED Module can be separated.

Aggiungi Commento

The battery can easily be removed. There is connector on the side of the board.
  • The battery can easily be removed. There is connector on the side of the board.

  • Battery Specs: Single Cell 1380 mAh 3.7 Volt

  • Sony Part: LIS1441

Aggiungi Commento

Remove the inner plastic (1 Screw) frame to expose the logic board
  • Remove the inner plastic (1 Screw) frame to expose the logic board

  • Remove the 2 top screws and one bottom screw to remove the logic board from the controller.

Aggiungi Commento

Logic Board Chip Closeups Included 503A 04c ALPS - Radio Module
  • Logic Board

  • Chip Closeups Included

  • 503A 04c ALPS - Radio Module

  • AKM8974948D - MEMS Gyroscope

Aggiungi Commento

mcwiggin

608 Reputazione

4 Guide realizzate

AKM 8974 - 3-axis Electronic Compass

Xeno - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 49

Tutti i Tempi: 12,367