Strumenti necessari in questo Smontaggio

Introduzione

Before disassembling, unplug the Camera from the PS4.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo PlayStation Camera, usa il nostro manuale di assistenza.

There are two PH0 Screws in the socket which hold the cable. Unscrew two PH0 Screws and pull off the cable holder. Unscrew two PH0 Screws and pull off the cable holder.
  • There are two PH0 Screws in the socket which hold the cable.

  • Unscrew two PH0 Screws and pull off the cable holder.

Aggiungi Commento

The next two PH0 Screws are located BEHIND the two polycarbonate-plates of the two camera-lenses. Take a sharp tweezer and stab under that plate. The plates are glued with a sticky tape to the housing. These plates are very fragile and will break if handled incautious. The next two PH0 Screws are located BEHIND the two polycarbonate-plates of the two camera-lenses. Take a sharp tweezer and stab under that plate. The plates are glued with a sticky tape to the housing. These plates are very fragile and will break if handled incautious. The next two PH0 Screws are located BEHIND the two polycarbonate-plates of the two camera-lenses. Take a sharp tweezer and stab under that plate. The plates are glued with a sticky tape to the housing. These plates are very fragile and will break if handled incautious.
  • The next two PH0 Screws are located BEHIND the two polycarbonate-plates of the two camera-lenses. Take a sharp tweezer and stab under that plate. The plates are glued with a sticky tape to the housing. These plates are very fragile and will break if handled incautious.

Aggiungi Commento

There is one more PH0  screw to remove. This one is behind the other lens.
  • There is one more PH0 screw to remove. This one is behind the other lens.

  • This was the easy part.

Aggiungi Commento

There are many clips in there. There are many clips in there. There are many clips in there.
  • There are many clips in there.

Aggiungi Commento

Encore two photos where to locate these nasty clips Encore two photos where to locate these nasty clips
  • Encore two photos where to locate these nasty clips

Aggiungi Commento

The other half of the housing is attached to a solid U-Frame with the electronics. There are four silver screws, PH0. Four microphones, two with black/yellow cables and two with black/red wiring.
  • The other half of the housing is attached to a solid U-Frame with the electronics.

  • There are four silver screws, PH0.

  • Four microphones, two with black/yellow cables and two with black/red wiring.

Aggiungi Commento

The backside of the U-frame. The cable is not soldered, there is a plug. Detail of the plug.
  • The backside of the U-frame. The cable is not soldered, there is a plug.

  • Detail of the plug.

Whats the make of the cable.. What do I search for in order to buy a new one

Chris - Replica

6 PH1 screws. Take a small magnet to hold them. 6 PH1 screws. Take a small magnet to hold them.
  • 6 PH1 screws. Take a small magnet to hold them.

Aggiungi Commento

The connector of the mikrophone-array The connector of the mikrophone-array
  • The connector of the mikrophone-array

Aggiungi Commento

The lenses, plastic, glued tight. NOT ADJUSTABLE. NOT ADJUSTABLE.
  • The lenses, plastic, glued tight.

  • NOT ADJUSTABLE.

Aggiungi Commento

Backside, two small PH0 at each CCD. But the Cameramodules are clued to the board,too - without destruction, you can not open it. I want to save it as spare-part, so i don't want to open it. So here is finito capito. :) Thanks for watching...
  • Backside, two small PH0 at each CCD. But the Cameramodules are clued to the board,too - without destruction, you can not open it.

  • I want to save it as spare-part, so i don't want to open it. So here is finito capito. :) Thanks for watching...

Aggiungi Commento

Extra: The wiring.
  • Extra: The wiring.

  • It's an USB3 cable without green/white Pimf. There are three SEPARATE ISOLATED metalfoil shields with wire, red-black-power and two Pimf yellow/blue and orange/green. So ja, thats it. Paulaner.

Aggiungi Commento

Schwarzstein

Membro da: 15/07/2013

2.209 Reputazione

20 Guide realizzate

Only 7 steps? Where is the rest of the teardown? I wanted to see detailed images of the optics.

Alexandru Voda - Replica

Ja, okay, i made some pictures for you. The optics are in Step 10.

Enjoy.

Freundliche Grüsse. :)

Schwarzstein - Replica

Does anyone think it would be possible to cut the wires from two cameras and splice the wires together and put the power on a A/B rocker switch to switch between two cameras?

Dan Schultz - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 77

Tutti i Tempi: 6,785