Strumenti necessari in questo Smontaggio

Introduzione

Follow this guide to completely disassemble your Palm IIIc.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Palm IIIc, usa il nostro manuale di assistenza.

Keep track of all pieces removed from the device.
  • Keep track of all pieces removed from the device.

  • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

Aggiungi Commento

Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
  • Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

  • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

Aggiungi Commento

Using a spudger, carefully pry open the front and back covers along the side seam.
  • Using a spudger, carefully pry open the front and back covers along the side seam.

  • A small sensor cover will fall out when the front and back covers are removed. Keep track of it.

Aggiungi Commento

Unhook battery cable from the motherboard and remove the battery.
  • Unhook battery cable from the motherboard and remove the battery.

Aggiungi Commento

Behind the motherboard remove the brown plastic clamp and remove the front screen cover. Behind the motherboard remove the brown plastic clamp and remove the front screen cover.
  • Behind the motherboard remove the brown plastic clamp and remove the front screen cover.

Aggiungi Commento

Unhook the blue and red screen cables. Unhook the blue and red screen cables.
  • Unhook the blue and red screen cables.

Aggiungi Commento

Pop out the other two brown plastic clamps to release the screen and buttons. Pop out the other two brown plastic clamps to release the screen and buttons. Pop out the other two brown plastic clamps to release the screen and buttons.
  • Pop out the other two brown plastic clamps to release the screen and buttons.

Aggiungi Commento

The black clips on the edges of the device (see picture) must be unclipped to remove the motherboard.
  • The black clips on the edges of the device (see picture) must be unclipped to remove the motherboard.

  • Carefully remove the motherboard from the device, pulling the motherboard away from the clips.

Aggiungi Commento

Pull the screen out from the front.
  • Pull the screen out from the front.

Aggiungi Commento

The object is now fully disassembled.
  • The object is now fully disassembled.

Aggiungi Commento

Paulina Trujillo

Membro da: 07/04/2011

241 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 20-69, Walters Spring 2011 Membro di Cal Poly, Team 20-69, Walters Spring 2011

CPSU-WALTERS-S11S20G69

5 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 4,571