Strumenti necessari in questo Smontaggio

Introduzione

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Mouse, usa il nostro manuale di assistenza.

Rotate mouse over and locate Trackball cover Using index fingers and thumb, rotate counter-clockwise Using index fingers and thumb, rotate counter-clockwise
  • Rotate mouse over and locate Trackball cover

  • Using index fingers and thumb, rotate counter-clockwise

Aggiungi Commento

After the Trackball cover has been rotated, pry the lid off using fingernails. Remove Trackball cover and place to the side. Angle mouse to eject Trackball from the casing.
  • After the Trackball cover has been rotated, pry the lid off using fingernails.

  • Remove Trackball cover and place to the side.

  • Angle mouse to eject Trackball from the casing.

Aggiungi Commento

Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside. Lift the two cases apart and place screw to the side. Lift the two cases apart and place screw to the side.
  • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

  • Lift the two cases apart and place screw to the side.

Aggiungi Commento

Remove the wire from the plastic casing near the top of the mouse. Lift up to remove the PCB which is attached to the mouse. Place case to the side.
  • Remove the wire from the plastic casing near the top of the mouse.

  • Lift up to remove the PCB which is attached to the mouse.

  • Place case to the side.

Aggiungi Commento

Locate where the wire is connected to the PCB via the white connection. Pry the connections apart and place the cable to the side. Pry the connections apart and place the cable to the side.
  • Locate where the wire is connected to the PCB via the white connection.

  • Pry the connections apart and place the cable to the side.

Aggiungi Commento

Kevin Gingrich

Membro da: 06/10/2011

172 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 20-28, Maness Fall 2011 Membro di Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Membri

7 Guide realizzate

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - Replica

Yes sir I won't know everything about the machine

mubarak wad gab tagel - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 23

Tutti i Tempi: 2,785