iPhone 7 Plus A1785 Parts
Grab a toolkit for your iPhone 7 Plus A1785 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Parti che funzionano con iPhone 7 Plus A1785:
iPhone 7 Plus Loudspeaker Gaskets
Replace the adhesive backed elastic gasket for the loudspeaker opening compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.
iPhone 7 Plus Lightning Connector Cable Conductive Adhesive
Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly compatible with the iPhone 7 Plus.
iPhone 7 Plus LCD Shield Plate Sticker
Replace the black adhesive that secures the LCD IC and cable to the LCD shield plate compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786 smartphone. Includ...
iPhone 7 Plus Digitizer Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 7 Plus. Set of 5 pads.
iPhone 7 Plus Battery Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 7 Plus. Set of 5 pads.
iPhone 7 Plus Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7 Plus. Includes a set of 5 pa...
iPhone 7 Plus Rear Camera Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of either of the rear-facing camera cable connectors in an iPhone 7 Plus. Includes a set of 5 pads.
iPhone 7/7 Plus Hold Switch Gasket
Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus.
iPhone 7/7 Plus SIM Card Tray Gasket
Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.
iPhone 7 Plus Rear Camera Foam Pads
Replace the adhesive backed foam pad between the rear-facing cameras and the rear case compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.
iPhone 7 Plus Speaker and Microphone Mesh Set
Replace the mesh covers for the speaker, vent, and microphone openings. Mesh covers are part of the water and dust ingress protection for the phone.
iPhone 7 Plus Earpiece Speaker Mesh Adhesive
Replace the custom cut adhesive film that secures the earpiece speaker anti-dust mesh bracket to the front panel compatible with the iPhone 7 Plus model #A1661, A1784, A1...
iPhone 7 Plus Flash Diffuser
Replace a scratched or missing camera flash diffuser lens.
iPhone 7 Plus Earpiece Speaker Mesh
Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.
iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place. Set of three.
iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.
iPhone 7 Plus Earpiece Speaker Gasket
Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A...
iPhone 7 Plus Earpiece Speaker Mesh Bracket
Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with iPhone 7 Plus model #A166...
iPhone 7 Plus Rear Camera Alignment Bracket
Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7 Plus.
iPhone 7 Plus Front Camera and Sensor Holders
These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.
iPhone 6 Plus/6s Plus/7 Plus Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus smartphone model A1522, A1524, A15...
iPhone 7 Plus Top Center Antenna Cable
Replace the antenna cable in the top center of the rear case compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786.
iPhone 7 Plus Front Panel Assembly Cable Bracket
This metal bracket secures the front panel assembly cables and the battery cable to the logic board.
iPhone 7 Plus Upper Cable Bracket
This metal bracket secures the audio control and power button cable connector to the logic board.
iPhone 7 Plus Rear Camera Connector Bracket
Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7 Plus.
iPhone 7 Plus Flash Bracket
This metal bracket secures the camera flash to the rear case.
iPhone 7/7 Plus Lightning Connector Grounding Spring Contact
Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.
iPhone Tigris SN2400B0 Charging IC
Replace an SN2400B0 charging IC on the logic board of an iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro solderin...
iPhone Display PMU 65730A0P
Replace a 65730A0P display PMU on the logic board of an iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part re...
iPhone and iPad LCD Data Choke
Replace a LCD data choke on the logic board of an iPhone or iPad. This part requires micro soldering.
iPhone 7 Plus Wi-Fi Diversity Antenna
Replace the Wi-Fi antenna and cable that is adhered to the loudspeaker in the lower right corner inside the rear case compatible with the iPhone 7 Plus model #1661, A1784...
iPhone 7 Plus Dual Rear Camera Lens Cover
Replace an external lens cover for the rear-facing cameras compatible with iPhone 7 Plus. Includes the metal bezel ring.
iPhone 7/7 Plus Home Button Bracket
Replace a missing or bent metal bracket securing the home button assembly to the display assembly in your smartphone.
Informazioni Dispositivo
Apple’s iPhone 7 Plus takes the familiar iPhone and tweaks it once again. It doesn’t possess new design changes or massive innovations, it offers everything the iPhone 7 does — speedy performance, water resistance, loud speakers, great cameras. The only real differences are the dual camera that offers Portrait mode, which when enabled, zooms in to the “telephoto” lens, keeping the subject sharp and blurring out the background for a nice bokeh effect.
The iPhone 7 Plus A1785 is available in Japan and it will be the first iPhone supporting Apple Pay in this country. Apple added the FeliCa tap-to-pay support, so now you can pay at convenience stores, vending machines and other retail locations in Japan. The A1785 is fully compatible with Docomo, AU, and Softbank after the addition of the LTE bands 11 and 21.
The most commonly needed repairs for the iPhone 7 Plus are cracked screens and dead battery replacements. iFixit has the best iPhone 7 Plus screens and iPhone 7 Plus batteries on the market, along with a complete catalog of other iPhone 7 Plus parts for the less common part swaps.
All iPhone 7 Plus repairs will require a Pentalobe P2 screwdriver and Tripoint screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. New to iPhone repairs is the iPhone 7 Plus display assembly adhesive, that will need to be purchased for any repair that removes the front screen. Since the iPhone 7 Plus is water resistant, a new screen adhesive will be required in order to retain its resistance to water damage. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete your desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 7 Plus repair guides for step-by-step instructions on how to make the fix.
The iPhone 7 Plus earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: