iPhone 7 A1780 Parts
Parti che funzionano con iPhone 7 A1780:
iPhone 7 Screen
Replace a scratched or cracked front glass panel or a malfunctioning display, front facing camera, or earpiece speaker on your iPhone.
iPhone 7 Replacement Battery
A new replacement 1960 mAh battery compatible with the iPhone 7. 3.8 Volts (V), 7.45 Watt Hours (Whr). This replacement does not require soldering and is compatible with ...
iPhone 6/6s/7 Battery Adhesive Strips
Use these custom adhesive strips to secure the battery of an iPhone 6, iPhone 6s, or iPhone 7 to the rear case.
iPhone 7 Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7.
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
SIM Card Eject Tool
Safely eject the SIM card from Apple GSM/LTE devices (iPhones and iPads) and other electronic devices.
iPhone 7 Lightning Connector Assembly
Replace the lightning connector, two microphones, and flex cable.
Flexible LCD holder
iPhone 7 LCD and Digitizer
Replace a scratched or cracked front glass panel or malfunctioning display.
iPhone 7 Bare Logic Board
This is only the board to which all the surface soldered components would be mounted. This part does not include any other components.
Externally, the Apple iPhone 7 is very similar to its predecessor. Other than a smoother look and a change in antenna band placement, not much has changed. However internally this phone is full of aggressive breaks from convention. Everything inside the new iPhone’s casing is a statement about the future of this phone. The home button is no longer a physical button, but rather full of pressure sensors and haptic vibration motors that simulate the feel of a button. The new A10 Fusion processor blends two high power cores that rival laptop performance along with two low power cores that combine with a much larger capacity battery to extend lifetime by up to two hours. This generation of iPhone has also seen the headphone jack removed, and in its place, new stereo speakers.
Model A1780 iPhone 7 is available exclusively from China Mobile and does not support CDMA networks. It is compatible with FDD-LTE bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, 20, 25, 26, 27, 28, 29, 30 as well as TD-LTE bands 38, 39, 40, and 41.
The most commonly needed repair for the iPhone 7 are cracked screens and dead battery replacements. iFixit has the best iPhone 7 screens and iPhone 7 batteries on the market, along with a complete catalog of various other iPhone 7 parts for the less common repairs.
All iPhone 7 repairs will require a Pentalobe P2 screwdriver and Tripoint screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. New to iPhone repairs is the iPhone 7 display assembly adhesive, that will need to be purchased for any repair that removes the front screen. Since the iPhone 7 is water resistant, a new screen adhesive will be required in order to retain its resistance to water damage. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete your desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 7 repair guides for step-by-step instructions on how to make the fix.
The iPhone 7 earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: