iPad Pro 9.7" Parts
Parti che funzionano con iPad Pro 9.7":
SIM Card Eject Tool
Safely eject the SIM card from Apple GSM/LTE devices (iPhones and iPads) and other electronic devices.
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
iPad Pro 9.7" Adhesive Strips
These custom cut adhesive strips attach the front panel to the case of the 9.7 inch model iPad Pro.
PlierTek Corner and Sidewall Repair Pliers
PlierTek Pliers are the easiest fastest way to fix bent iPhone and iPad corners and sidewalls.
iPad Pro 9.7" LCD Screen and Digitizer
This assembly includes the LCD and glass digitizer screen.
iPad Pro 9.7" Lightning Connector
Replace the lightning connector and its cable for a 9.7 inch iPad Pro. This part requires micro soldering.
iPad Pro 9.7" Home Button Assembly
Replace the home button and flex cable assembly for the iPad Pro 9.7" and fix an unresponsive home button.
iPad Pro 9.7" (Wi-Fi) Logic Board Connector Cable
Replace a torn or corroded connector flex cable on the logic board of a Wi-Fi model 9.7 inch iPad Pro. This part requires microsoldering.
iPad Pro 9.7" Battery
Replace a dead 7306 mAh battery compatible with a 9.7 inch iPad Pro tablet.
iPad Pro 9.7" Test Cables for Display Assembly
This set of three test cables simplifies connecting and testing the LCD, digitizer, and home button in a display assembly for a 9.7 inch iPad Pro.
The iPad Pro 9.7" is smaller version of Apple's original 12.9" high performance tablet. Like its larger counterpart, the Pro 9.7" features an A9X processor, support for the Apple Pencil, and a 4-speaker audio setup.
Identifying the 9.7-inch iPad Pro can be difficult, as it has the same physical dimensions and weight as the iPad Air 2. Compared to the Air 2, the Pro features a three-pin Smart Connector along its left edge, as well as speaker grilles on the top and bottom edges. The Pro's model number, A1673 (Wi-Fi Only) or A1674 (Wi-Fi and Cellular), is etched on its rear case.
The most common repairs for the 9.7 inch iPad Pro are replacing a cracked front glass screen or a dead battery. The iPad Pro 9.7" front glass panel is held to the aluminum case with strips of adhesive. Once the device is opened, this adhesive will need to be replaced.
The iPad Pro 9.7" earned a 2 out of 10 in iFixit's repairability assessment. Watch the Teardown Review for more: