Il Mio Problema
Battery wouldn't hold a charge
La Mia Riparazione
Replaced the battery but I the battery won't charge
Il Mio Consiglio
Get an extra battery
Questo prodotto non è disponibile nel tuo Paese.
Codice Articolo: IF317-092-1
Questo prodotto non è disponibile nel tuo Paese.
19,99 USD
In offerta
Le parti usate dello Stock A sono in eccellenti condizioni
Le parti usate dello Stock B presentano modesti segni di usura esterna
Le parti usate dello Stock C presentano rilevanti segni di usura esterna, ma funzionano perfettamente
19,99 USD
In offerta
Esaurito
Non abbiamo tante scorte disponibili
Dettagli Prodotto
Descrizione
Descrizione
60w Classic style soldering iron from Hakko. This reliable dual-coil iron maintains a temperature of approximately 460 to 485 Celsius. Includes a chisel tip. Great iron for home and hobby use.
Storie di Riparazione
Battery wouldn't hold a charge
Replaced the battery but I the battery won't charge
Get an extra battery
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemble though, so all worked out well.
One important piece of advice. The ifixit instructions list a #00 Philips screwdriver under tools however I needed a #0000 Philips to get the screws out.
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemb . . .
Chi ha comprato ha acquistato anche
Prodotti In Evidenza