MacBook Unibody (A1342) Lower Case

  • MacBook Unibody (A1342) Lower Case
MacBook Unibody (A1342) Lower Case

149,99 US$

149,99 US$

Ti invieremo un messaggio quando il prodotto sarà nuovamente disponibile.

Dettagli Prodotto

Descrizione

Descrizione

Replace a dented or scratched lower case compatible with a Model A1342 MacBook Unibody laptop.

Compatibilità

Compatibilità

  • MacBook 13" Unibody A1342 Late 2009 to Mid 2010

Specifiche

Specifiche

Part #:
922-9183, 661-5974
Model #:
A1342

Compatibilità

MacBook Unibody A1342
2.26 GHz
2.4 GHz

Storie di Riparazione

Avatar utente
gveldman's Story Photo #462277

Il Mio Problema

A few weeks ago the rubber coating released it self, caused by the heat, from the lowercase of our Macbook, end 2009 version. Because the Apple replacement program was not applied on this Macbook, I decided to repair it my self. The Macbook is in perfect state, including 4GB memory and running Yosem . . .

Avatar utente

Il Mio Problema

Rubberized on original back was coming off. Rubber stretched and buckled over time

La Mia Riparazione

Easy, eight screws and done. Finding the correct back from other vendors was the greatest headache

Il Mio Consiglio

call Fixit first.

Avatar utente

Il Mio Problema

My partners late 2009 Macbook started to fall apart all at once. The rubberised bottom peeled off, the batter stopped holding a charge and the fan failed.

I replaced the laptop with a new macbook and kept the old one until it failed completely which was the day after it was replaced.

A year later . . .

Avatar utente

Il Mio Problema

Bottom was missing screws, and rubber was coming off the metal. Was not affecting operation of the laptop. More cosmetic than anything.

La Mia Riparazione

Got the new bottom and screws in the mail a few days after I ordered them, removed the old bottom, and installed the new bottom within minutes. Very easy to do.

Il Mio Consiglio

N . . .

Avatar utente

Il Mio Problema

Heavy-duty processing warms up the underside of my MacBook, and eventually the rubber layer on the base-plate released itself from the metal where the heat is most intense and created a large bubble. The computer couldn't sit flat on a tabletop anymore, so a replacement base-plate was required.

La Mia Riparazione

The n . . .

Avatar utente

Il Mio Problema

My wife's Macbook stopped charging. After a short troubleshooting I figured out that the Magsafe connector was at fault. Also, as the laptop was mostly used on soft covered surfaces, cooling was poor, causing some overheating of the lower case, hence causing bubbling of the non slippery rubberized s . . .

Avatar utente

Il Mio Problema

Because it was broken.

La Mia Riparazione

10 min. Done.

Il Mio Consiglio

It's great. Never grab your chick and through it to the bed when the laptop is sitting there. The display screen may suffer.

Avatar utente

Il Mio Problema

The old case was coming apart and needed to be replaced.

La Mia Riparazione

Very easy, just remove old case and replace with the new one.

Il Mio Consiglio

Having the right screwdriver made the job easier. Would recommend that first.

Mostra di più