Annulla
Dettagli Prodotto
Descrizione
Replace a broken or damaged MagSafe DC-in board for your Mid 2012 or Early 2013 MacBook Pro 15" Retina with this part. This part connects wall adapter power to logic board.
Compatibilità
| MacBook Pro 15" Retina Display Early 2013 |
|
|||
| MacBook Pro 15" Retina Display Mid 2012 |
|
Storie di Riparazione
My magsafe was burnt due to not unplugging the charger when 100%.
Everything was easy to find thanks to great photos in the guide. Dropped the screws underneath the logic bosrd a couple of times but I carefully shaked them out and back at it.
As ZIF cables can be tricky to put back in place. (Especial . . .
The battery was not charging, the green led sometimes was on, sometimes off. With the new magsafe2 board the battery begins to charge, the led changes from green to orange. But there is one problem. When the computer is turned on, the led turns off and the computer remains working maintained only by . . .
MacBook Pro was no longer charging, there was charring. Something was wrong with my original MagSafe connector.
It went great! The iFixit walkthrough was very helpful. I have done this sort of thing, so I was comfortable with it.
Print out the instructions, and then tape the screws to them with clear . . .
MacBook not charging
The repair went pretty smoothly. The trickiest part was removing the keyboard ribbon cable. The instructions were not clear to show the actual location of the section that you have to flip up. With patience it wasn't too difficult to figure out. The project tray came in very . . .
