Aggiusta la tua roba

Diritto alla Riparazione

Store

Parts Mac MacBook Pro MacBook Pro 13" MacBook Pro 13" Unibody MacBook Pro 13" Unibody Early 2011
Store

MacBook Pro 13" Unibody Early 2011 Parts

Grab a toolkit for your MacBook Pro 13" Unibody Early 2011 model and fix a broken laptop!

iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.

Non sai qual è il tuo modello? ID del tuo Mac
MacBook Pro Unibody Lower Case Screw Set / Fix Kit
MacBook Pro Unibody Lower Case Screw Set

Replace a stripped or missing screw securing the lower case of most Unibody model MacBook Pro laptops. The excluded models are the Late 2008 and Early 2009 15" MacBook Pr...

Da 9,99 USD
MacBook Pro 13" Unibody Microphone
MacBook Pro 13" Unibody Microphone

Replace a damaged or malfunctioning microphone and its cable for a MacBook Pro 13" Unibody.

9,99 USD
2.5" Hard Drive Enclosure with USB 3.0 Cable
2.5" Hard Drive Enclosure with USB 3.0 Cable

Turn any SATA 2.5" laptop hard drive into an external storage drive with this part.

12,99 USD
MacBook Pro Unibody 13" and 15" MagSafe DC-In Board
MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

Replace a damaged or malfunctioning magnetic DC power connector.

14,99 USD
MacBook Pro 13" Unibody Hard Drive Bracket / Without Hard Drive Screws
MacBook Pro 13" Unibody Hard Drive Bracket

Replace the plastic bracket that secures the Hard Drive.

Da 14,99 USD
MacBook Pro 13" Unibody (Early 2011-Late 2011) Heat Sink
MacBook Pro 13" Unibody (Early 2011-Late 2011) Heat Sink

This part attaches to the processor and helps dissipate heat.

17,99 USD
MacBook Pro Unibody Lower Case Screw and Foot Kit
MacBook Pro Unibody Lower Case Screw and Foot Kit

Replace a missing or scuffed plastic foot or a missing screw securing the lower case of most Unibody model MacBook Pro laptops.

19,99 USD
MacBook Pro Unibody (A1278) Keyboard
MacBook Pro Unibody (A1278) Keyboard

Replace a damaged, dirty, corroded, or malfunctioning keyboard and power button switch compatible with a mid 2009 to mid 2012 A1278 model 13" MacBook Pro Unibody laptop.

19,99 USD
MacBook Pro 13" Unibody (Early 2011-Mid 2012) SATA SuperDrive Cable
MacBook Pro 13" Unibody (Early 2011-Mid 2012) SATA SuperDrive Cable

This cable connects the SuperDrive to the logic board.

19,99 USD
PC3-10600 4 GB RAM Chip
PC3-10600 4 GB RAM Chip

Add or upgrade the RAM in your computer. 4 GB / PC3-10600 / Low Profile / 204 pin, 1333 MHz

Da 19,99 USD
Visualizzazione prodotti 11 - 20 di 53

Informazioni Dispositivo

In February 2011, Apple refreshed the 13" MacBook Pro line by changing to the Intel HD Graphics 3000, increasing VRAM to 384 MB, and upgrading to Core i5 and Core i7 processors with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.

The most common repairs with the MacBook Pro 13" Unibody for Early 2011 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody (Early 2011) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 16 GB of RAM.

The MacBook Pro 13" Unibody for Early 2011 requires a Tri-point Y0 Screwdriver to remove the battery. The battery kit includes all the needed tools.

Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Early 2011 repair guides for step-by-step instructions on how to make the fix.