Galaxy S7 Replacement Battery
La maggior parte delle persone ha comprato questo
Replace a dead or damaged battery in the Samsung Galaxy S7 smartphone.
Safely poke and pry just about anything with this tough, heat resistant, and antistatic tool for electronic repair. 5” nylon tool essential for smartphone or tablet dis...
Apply gentle, even heat to loosen the adhesive holding smartphone, tablet, and laptop case components and batteries. Make opening your device easier and safer.
Tools for holding and manipulating small and delicate components. Blunt, pointed, and angled versions.
iFixit Opening Picks (Set of 6)
Thin prying tool for opening electronic devices. Opening picks are essential to open any iPad, tablet, or smartphone sealed with adhesive.
45 mm diameter suction cup is a necessary tool for opening iPhones, tablets, and other devices.
Phillips #00 Screwdriver
Standard Phillips screwdriver used to take apart laptops. Swivel top handle with precision tip driver.
Loosen adhesive or reflow solder with this 1500W heat gun. Low setting reaches 570/300 °F/°C. High setting reaches 1112/600 °F/°C. Perfect for loosening adhes...
Galaxy S7 Rear Cover Adhesive
This set of four custom cut adhesive films for a Samsung Galaxy S7 secures the rear cover panel to the phone, the rear-facing camera bezel to the rear cover, and the batt...
Galaxy S7 Battery Adhesive Strips
Use these custom adhesive strips to secure a Galaxy S7 battery to the midframe.