Aggiusta la tua roba Comunità Store

iomega LDHD250-U Teardown

Cosa ti serve

  1. iomega LDHD250-U Teardown, Remove Rear Screws: passo 1, immagine 1 di 1

    • Remember to power off and unplug the unit before opening it up!

    • Remove the two PH #0 Screws

    Modifica

  3. iomega LDHD250-U Teardown, Removing the cover: passo 2, immagine 1 di 2 iomega LDHD250-U Teardown, Removing the cover: passo 2, immagine 2 di 2

    • After removing the back part of the unit, slide the front part out.

    • Remember to put aside the center part you removed

    Modifica

  4. iomega LDHD250-U Teardown, Removing the Hard Drive: passo 3, immagine 1 di 3 iomega LDHD250-U Teardown, Removing the Hard Drive: passo 3, immagine 2 di 3 iomega LDHD250-U Teardown, Removing the Hard Drive: passo 3, immagine 3 di 3

    • There are two ways to remove the Hard Drive

    • 1. Removing the 4 screws on the side of the unit

    • 2. Sliding the HDD back and then releasing it (my unit will not slide back)

    • The HDD can now be lifted out, unplugged, and replaced, upgraded, or keep it the same.

    • Pull up and unplug as the cables can break if too much force is applied

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 29

Tutti i Tempi: 994