You will need:

1x PH00

1X Splicer

2X Plastic Opening Tools

1X Suction Cup

Use the Plastic Opening tools around the screen in order to pry it open.

Next use the suction cup to lift the screen.

You can then remove the suction cup from the screen.

After that move the screen to the side.

Now you can lift the LCD Screen and start to remove the screws with the PH00.

Once you do that you have to separate the black square from the rest so you can fully remove the LCD Screen.

After that you can set the LCD Screen to the side.

After, use the PH00 to remove more screws.

Then use the splicer to start removing the orange square shown.

Once you do that, you can remove the battery and ribbon cable and set it aside.

You are now down with the teardown. If you want to put it back together again just follow the same steps backwards.

This is at a moderate level, definitely not something you should try without a guide.

In conclusion, the teardown went well and we managed to understand most of the components in the device.