Introduzione
Il nuovo iPad Pro 11" propone cornici più sottili, angoli dell'LCD arrotondati e silicio d'avanguardia. Questo, apparentemente, è l'iPad che Apple aveva sognato di produrre fin dall'inizio, ma ciò che noi sogniamo è un dispositivo facile da riparare. Questo iPad farà avverare entrambi i sogni oppure il nostro rimarrà nel cassetto? C'è solo un modo per rispondere: con uno smontaggio!
Prendi al volo i nostri Tweets o buttati sulle nostre pagine Facebook e Instagram per tenerti al passo con le ultime notizie sugli smontaggi!
Cosa ti serve
-
-
Diamo un'occhiata a che cosa distingue questo iPad Pro dai suoi compari dilettanti:
-
Display TFT da 11" Liquid Retina a laminazione completa retroilluminato a LED, risoluzione di 2388×1668 (264 ppi), Tecnologia ProMotion
-
Processore octa-core specifico Apple A12X Bionic con coprocessore di movimento M12 e GPU 7-core integrata
-
Fotocamera posteriore da 12 MP con registrazione video 4K a 60 fps e fotocamera TrueDepth da 7 MP con video 1080p
-
Audio con quattro altoparlanti e balance automatico
-
Face ID, cinque microfoni, sensore luce ambiente, accelerometro, barometro e giroscopio a tre assi
-
Wi-Fi MIMO dual band 802.11a/b/g/n/ac + Bluetooth 5.0
-
Memorizzazione interna da 64 GB, 256 GB, 512 GB oppure 1 TB
-
-
-
Ogni anno che passa, Apple appare sempre più vicina a realizzare il suo sogno di vendere una lastra di vetro con il suo logo sul retro.
-
È una fortuna per noi poter disporre liberamente dei raggi X di Creative Electron, altrimenti questo sembrerebbe soltanto un rettangolo nero.
-
Come sempre, le parti più scure nell'immagine a raggi X rappresentano materiali densi che assorbono una maggior quantità di raggi X; di solito si tratta di magneti come quelli utilizzati negli altoparlanti e per accessori applicabili.
-
Di questi vediamo un numero considerevolmente superiore al solito.
-
-
-
È il momento dell'ispezione visuale. Sopra lo Smart Connector riposizionato di fresco, abbiamo un nuovo numero modello: A1980.
-
Rispetto al suo predecessore da 10,5", sembra più o meno lo stesso e gli 0,2 mm persi sono difficili da valutare a causa dei bordi arrotondati.
-
Non che ci interessi, ma ci ricorda alcuni dei concorrenti più riparabili dell'iPad.
-
Note finali prima di tuffarci all'interno: non c'è il jack cuffie ☹, c'è una porta USB-C (non-Thunderbolt) invece della Lightning e un lungo ovale scuro per caricare il nuovo Pencil.
-
-
Attrezzo utilizzato in questo passaggio:iOpener$19.99
-
Avevamo amato l'esperienza di affettare tutta la colla presente per aprire il nostro primo iPad e da allora è sempre stato un caro ricordo.
-
Essere allenati a questa pratica aiuta, ma queste cornici ultra sottili rendono la cosa ancora un po' più straziante del solito. Scalda, intaglia, trattieni il respiro e spera che non si rompa nulla.
-
Tra le cose positive, c'è il fatto che i cavi a nastro del display sono a distanza di sicurezza dalle cornici; è anche vero, però, che sono sparsi in giro in un modo che rende veramente scomoda la rimozione del display.
Actually on the left side of the display there are some sables that are quite close to the edge. DIYers beware!
-
-
Attrezzo utilizzato in questo passaggio:Phillips #00 Screwdriver$5.49
-
Questi cavi non sono ancora veramente sicuri, perché siamo costretti a disporre il display a uno strano angolo con la speranza di non danneggiare nulla mentre scolleghiamo i cavi stessi.
-
Mettiamo al lavoro il nostro cacciavite Phillips per liberare entrambi i connettori dei cavi.
-
Ora vediamo quello che i raggi X avevano cercato di mostrarci! Una cosa che spicca immediatamente è il quartetto di altoparlanti dell'iPad.
Is there a reason for empty space in the body of the iPad? Prevent interference or damage from the wireless charging unit?
The space is reserved for Display cable/PCB. You can refer to the X-Ray photos and the screen assembly
What is the name of the flex cable that was disconnected from the logic board after removing the protective plate at the top of the screen? The flex cable seems to have a microphone and a few sensors. On the repair I am working on the customer has ripped one of the sensors and it needs to be replaced but I cannot find a replacement.
I may have figured it out, but can’t find a replacement part anywhere at this time. I believe the flex contains the Ambient Light Sensor, Flood illuminator, Dot projector.
Does anyone know where they have seen this part for purchasing?
Hi Brandon,
This part is difficult to source, because it is inherently paired to the T2 security chip—you can’t restore functionality with a replacement part unless you have access to Apple’s special software.
This question may have been answered already - maybe I missed it - there is a flex sensor cable at the top of the display - each end of the cable has some kind of sensor that fits into a notched area at the top of the iPad case. It also has other components that fit between the cameras and dot detector. Does this cable have anything to do with Face ID?
-
-
-
Ecco il nuovo display Liquid Retina: ingrandito da quando l'abbiamo visto per la prima volta e con la stessa fantastica frequenza di refresh di 120 Hz che avevamo trovato sull'ultimo iPad Pro.
-
Questo nuovo e sofisticato display porta con sé anche alcuni nuovi chip:
-
Timing controller Parade Technologies DP825 (lo stesso che avevamo già visto sull'iPad Pro 10.5”)
-
Texas Instruments TPS65158 (forse una variazione dell'IC LCD Bias TPS65168)
-
Generatore di tensione di riferimento Renesas (ex Intersil) ISL24833A 18-Ch. TFT-LCD con (probabilmente) EEPROM integrato
Is this the reason why the left side of the ipad is warmer than all the device?
i cant find this specific screen anywhere
-
-
-
Ansiosi di dare un primo sguardo a questo chip A12X
box, passiamo a staccare la cover della scheda logica. -
Ma che schifo: come sempre, la scheda è fissata con adesivo e la cosa è resa ancora più impegnativa degli altoparlanti, che bloccano quasi tutti i punti di accesso all'apertura.
-
Ma noi siamo impazienti e ne usciamo rapidamente vincitori. La scheda logica emerge trionfalmente dal canyon tra le celle della batteria.
-
-
-
Alla fine siamo premiati da pezzi di silicio:
-
Soc A12X Bionic Apple APL1083
-
Memoria flash (64 GB totali) Toshiba TSB3247M61710TWNA1
-
2x RAM Micron MT53D256M64D4KA-046 XT:B SDRAM (4 GB totali)
-
Controller NFC NXP 100VB27 (SN100V)
-
Modulo Wi-Fi / Bluetooth Apple / USI 339S00551
-
2x controller touchscreen Broadcom BCM15900B0KWFBG
-
Controller alimentazione Texas Instruments CD3215C00 USB C
Looks like there's is a reserved space for second nand storage chip. I wonder if in future storage updates would be possible?
The space is likely to be filled if you bought the higher capacity iPad Pro option. This is the lowest capacity option, so there is a free pad.
More interesting is that the DRAM looks like it’s mounted on the same substrate as the A12X (ie not directly on the PCB like earlier iPads), so slightly closer to the PoP of iPhones. Is the substrate Si, or something else with lower capacitance than PCB?
It is not PoP package(Package-on-Package) . From the photo of A12X, it should not be PoP package(processor is next to two memory chips). Is that TSMC’s InFo or CoWos package technology?
JJ Wu -
Yes, that substrate is super-interesting. We need benchmarks comparing RAM bandwidth between this and the prior-gen iPads. What’s next for Apple … HBM?
HBM can provide higher BW. But, from power consumption, most likely, it can not be. LPDDR4x can provide lower power consumption menory solution for mobile devices, such as iPad.
JJ Wu -
So for the 6GB of RAM in the 1TB version, it is likely there is 1x4GB and 1x2GB DRAM chips, or might Apple have actually put 8GB of RAM, but only expose 6GB for user apps ?
perhaps the extra 2GB would used by the storage controller so it can manage the extra 512GB of storage ?
Any plans to tear down the 1TB version ?
I wonder what’s the minimum storage option that will start having a second NAND chip (assuming that empty space will indeed be covered with a second NAND chip in other size options).
I believe that TI’s CD3215C00 is a USB-3.1 redriver.
What are the dimensions of this board?
Does anyone know which Tristar chip this model uses?
-
-
-
-
Questi chip non possono essere confinati nello spazio di un solo passo, quindi eccone degli altri:
-
STMicroelectronics STB601A0, probabilmente gestione dell'alimentazione
-
Apple 343S00252-A0 1834PHHE, probabilmente gestione dell'alimentazione
-
Apple 343S00257-A0 1834PHGI, probabilmente gestione dell'alimentazione
-
Apple 343S00248-A0 1835NHGY, probabilmente gestione dell'alimentazione
-
Texas Instruments 343S00235, probabilmente caricatore IC
-
Diodes Incorporated PI3DPX1203 DisplayPort 1.3 4-lane linear re-driver
-
NXP Semiconductor CBTL610 DisplayPort, probabilmente un multiplexer
Pretty sure the last one is a Pericom / Diodes Incorporated PI3DPX1205A USB 3.1 / DisplayPort 1.4 Alternate Mode 10 Gbps Type-C Active Mux / Linear Re-driver (or something similar): https://www.diodes.com/products/connecti...
-
-
-
L'identificazione degli IC della scheda madre, continua:
-
Winbond W25Q80DV 8 Mb Serial NOR Flash
-
ON Semiconductor FUSB301A,probabilmente controller USB Type-C
-
Convertitore audio stereo Analog Devices ADAU7002
-
Amplificatore audio Maxim Integrated MAX98357A 3.2 W Mono Classe D
-
Protezione porte USB type C Texas Instruments TPD6S300A
-
Convertitore innalzatore Texas Instruments TPS61230A 6 A
-
Synchronous Boost Converter Texas Instruments TPS61178 10 A
-
-
-
È il momento della batteria! Non siamo fan degli iPad dell'anno scorso, che avevano eliminato le strisce adesive allungabili per estrarre la batteria.
-
Quest'anno le strisce allungabili fanno un grande ritorno: sei strisce a forma di U! Ogni striscia ha due linguette, garantendo al riparatore una seconda possibilità nel caso che una dovesse rompersi. Bello!
-
Ma il piacere finisce qui. Un enorme pezzo di roba appiccicosa percorre l'intero lato sinistro. Sigh. È il momento di tirar fuori gli strumenti di apertura.
-
Siamo rimasti senza parole. Perché Apple ha fatto questo? Possiamo solo ipotizzare che l'adesivo sia qui come "rinforzo alla rigidezza".
-
Questo iPad è alimentato da una batteria da 7812 mAh e 3,77 V ovvero 29,45 Wh; un lieve passo indietro rispetto al pacco da 30,8 Wh dell'iPad Pro da 10,5" e molto meno della batteria da 45 Wh del più recente Microsoft Surface Pro.
“We were left speechless. Why would Apple do this?”
Those speakers pack a load of low bass.
component vibrations are out.
That is definitely a possibility. However, we were confused as to why Apple would choose to use stretch adhesives in conjunction with it, and why it’s only one one side of the battery…the left side. We found a similar band of super-adhesive in the same location on the new 2018 iPad Pro 12.9”.
Very weird. Is it possible that Apple repair techs use an adhesive dissolving solution? Would make the repair “easy” for them while keeping the batteries solidly in place.
En la traduccion al castellano, en el parrafo que dice “Nos hemos quedado sin palabras. ¿Por Apple aria esto?…” daña la vista el “aria” sin h :-) Por favor corregirlo cuando podáis ;-)
¡Hola Ruben! Te invitamos a que nos ayudes a traducir las guías al español. Puedes ser un voluntario más y ganar puntos de reputación. Tenemos muchos voluntarios, pero nos vendría genial tener más gente que encuentre errores de ortografía o que ayude con la traducción de las muchísimas guías que tenemos aquí. Saludos, y gracias por tu buen ojo.
-
-
-
Ed eccolo, al debutto nell'iPad: il Face ID.
-
Più specificamente, questo è lo stesso hardware di base che abbiamo visto dai tempi dell'iPhone X: proiettore di punti a infrarossi, fotocamera da selfie e fotocamera a infrarossi, ma con un fattore di forma lievemente modificato.
-
Nel frattempo, peschiamo la fotocamera posteriore; Apple dice che ha le stesse prestazioni della fotocamera degli iPad precedenti, ma è stata ripensata per avere un minore spessore.
-
Avendo perso la stabilizzazione ottica OIS e mantenuto un'enorme gobba per la fotocamera, questo progetto sembra all'insegna del compromesso.
The IR dot projector IS the flood illuminator.
No it isn’t. Those are two separate components, just like on iPhone.
The IR flood illuminator sits right between the FaceTime- and IR-camera and is probably part of the front assembly, while the IR dot projector is way off to the right of the FaceTime camera as seen above.
MrUNIMOG -
-
-
-
Vogliamo proprio rimuovere questi altoparlanti?
-
Più facile a dirsi che a smontarsi. Gli alloggiamenti sono scavati nel case di alluminio e gli altoparlanti chiaramente non sono pensati per essere rimossi. La loro estrazione richiede una tonnellata di calore e forza di volontà.
-
I tweeter vengono via senza lottare, ma i woofer sono ben altra cosa: c'è da augurarsi che siano realizzati in materiale antiguasto!
-
Nascosti nella camera degli altoparlanti, ci sono degli altri magneti! Se ci dessero un soldino per ogni magnete qui dentro, potremmo fondere il ricavato e farne un soldone gigante.
Any idea why so many magnets? That looks like 12 in the housing on the right side, but only one voice coil with the one large one in the middle. What are the 3x3 array on the left, and the 2x1 array on the right for?
Accesories. I suppose that’s because such a matrix allows a nearly perfect allignement with pencil/keyboard, thinking to a “flatter” magnetic field instead of a round big one
-
-
-
Il prossimo estratto è la scheda di ricarica del Pencil, insieme alle sue bobina di ricarica in rame.
-
Tecnicamente è stato estratto, ma non è stato senza spargimento di sangue...
-
Piccoli condensatori e altri pezzi della scheda volano via per protesta mentre rimuoviamo le schermature. Ci dispiace per loro? Niente affatto.
-
Ma che cosa c'è qui, nascosto nell'angolo? È una MCU ARM Cortex STMicroelectronics STM32L476JGY6.
-
Pompa di carica Texas Instruments TPS60151 5V
-
Interruttore di carico ON Semiconductor FPF1204UCX
Those flying board bits are the Chinese spy chips trying to evade identification. Conspiracy theorists discuss…
Do you think it would be possible to "extend” the charging coil from outside so that pencil could be charged without removing from a case? I’m very unfamiliar with how coil charging works so this may be a totally stupid question. In the simplest terms I’m thinking of just a piece that fits on the outside of the ipad case where the pencil would go, and extends it about 5mm into the hole on most of the cases that are currently available.
Technically, that is possible, and one could even build it into a case. You could place something made of iron in a specific shape that would couple and extend the magnetic field out. Efficiency would drop based on how well it’s implemented though. But, this wouldn’t be necessary if the case material is thin.
Most likely! Please check this link for more details.
Can this piece be used sand alone without the rest of the iPad? I want to sit my pencil on a desk charging and not always drawing power from my already fragile battery ? life on my iPad. I was thinking maybe just ‘Aquire this part’ & make an external case for it.
my iPad Pro 2018 has a damaged pencil charging magnetic coil. So my iPad is not recognising any pencil. Apple is also not offering any service. What can I do about it?
We're you ever able to get it fixed?
where can we purchased this item. i have water damage board for this. pencil no work and not detected
Did you ever find a replacement part?
What is magnetic sensor for smart cover?
-
-
-
L'ultimo estratto è la porta USB-C: diversamente dagli iPad precedenti, è totalmente modulare.
-
Si tratta di un componente soggetto a forte usura, quindi la possibilità di sostituirlo in modo indipendente dalla scheda principale è una bella vittoria per il riparatore.
-
Potrebbe non essere una vittoria per chi ha pesantemente investito nell'interfaccia Lightning, ma il nostro messaggio per questa gente è: perlomeno l'USB-C offre una velocità di trasferimento più elevata in un fattore di forma standardizzato e non di tipo proprietario.
-
Di fatto nello chassis rimane solo un'intera tonnellata di
soldinimagneti.
“At least USB-C offers faster throughput in a standardized, non-proprietary form factor.”
At least Lightening could configure itself to carry analogue audio at an adequate power level for headphones.
The Lightning spec has never allowed analog passthrough, to the best of my knowledge—it’s all digital. If it could carry an analog signal, you wouldn’t need a DAC embedded in the headphone dongle. USB-C headphones in general are definitely kind of a mess right now though.
“At least Lightening could configure itself to carry analogue audio at an adequate power level for headphones.”
Do you mean that this cannot? https://www.apple.com/shop/product/MU7E2...
Lightning plugs have all of their contacts exposed, and users inevitably touch them, depositing skin salts and oils that together with the electrical current over time causes corrosion of the plugs and the device’s internal contacts. USB-C ought to be much more reliable in the long term because users can’t casually touch any of the contacts. Lightning cables also have an extremely high failure rate at the point where the cable attaches to the connector, with broken conductors and/or insulators.
USB-C also can handle much higher current and much faster data rate than Lightning.
And USB-C allows for hard drives, Ethernet, monitors, DSLRs, CD/BluRay drives - if anyone uses them - CD seems basically dead - is BluRay on its way out too?
Just about. It’ll be replaced by SD’s or small SSD’s, which will likely be followed by holochrons.
I’m glad they decided to make the type c port modular, as an iPhone user who’s used to Lightning port robustness I’m never comfortable plugging in type C devices.
Type C’s snap feels quite similar to USB micro-B, which in my experience they don’t last long ( at year 2 they started getting loose, and at year 5 most of them has lost most the resistance if not all. In contrast I have never found an iPhone with loose lightning port.
Hi, I’m a newbie to self-repairs but basically my charging port or the “chip” that the local repairmen said may be damaged, can someone tell me what is that second part above the USB-C charging port? Oof, much gratitude and thanks.
where is the micrphone
-
-
-
Ok, tecnicamente c'è un punto di accesso, ma sappiamo che da questa punta non si va da nessuna parte.
-
Rimossa la punta, passiamo ai grossi calibri. Estraiamo la Lama ultrasonica!
-
Quando la polvere si dirada, emerge una barra metallica dal guscio di plastica color bianco Apple.
-
Guardandoci in giro, notiamo il nuovo arnese di ricarica wireless, dei magneti, una guaina nera e un tecnico di smontaggi ferito.
We tried pairing the old Pencil to the new iPad by using a Lightning to USB-C connector, but the iPad refuses to acknowledge the old Pencil.
We honor the engineer’s sacrifice
how did he get cut? I thought iFixit was safe!
“She” actually =) I was wearing safety goggles, but unfortunately my hands weren’t wearing armor.
Is there a technical reason why the new pencil couldn’t be backward compatible to the first-gen iPad Pro? Or to allow for wireless charging on the old iPads, could Apple have made a thin smart-connector accessory that would get power from the smart connector and then have the necessary Qi-like charging coil to transmit to the ApplePen2. That would be a problem for the first gen non-Pro iPad, which doesn’t have a smart connector - but it could also have a lightning plug in the center.)
It seems that “buy the pencil now, upgrade to a new iPad pro later when you have the 2K to do so” marketing strategy might work. Though if you’re going to drop 2K on a new iPad, 0.12K for a new pencil really isn’t that much I guess.
-
-
-
Un grande cavo a nastro nero si srotola lungo il corpo del Pencil, mostrando quello che sembra una griglia capacitiva!
-
Sfortunatamente, dobbiamo ritornare all'opera di demolizione: i molti strati di acciaio saldati del Pencil sono un osso duro e noi riusciamo a scoprire solo pochi componenti.
-
Batteria (nemmeno noi vogliamo avere a che fare con questo piccolo esplosivo)
-
Bobina di ricarica wireless
-
Magneti di allineamento
-
Broadcom BCM59358A0, probabilmente IC di carica wireless
-
Analog Devices 343S00250, probabilmente controller del sensore della Apple Pencil
What is the gold piece at the end of the pen? My dog chewed mine off. Its still working ;)
If it's the same as in the 1st gen teardown, then:
the antenna, decked in the familiar Apple black and gold
I’m surprised the Apple IC (blue) doesn’t have “P2” on it (P for “pencil”).. How does the “tap” work - is it a tap of the pen tip on a surface, or a finger tap/squeeze on the barrel of the pencil itself? The capacitance grid looks like it’s separated into “square-like-areas” (9x6 it looks like). Could this be to allow for multi-touch on different places? Something like different brushes in a graphics app depending on where you held the pen? (Say holding it with index and thumb - close to the tip end for a writing tool, middle for something like a paintbrush , or the “erase” end for something like a “spray-paint” or dodge/burn brush).
Or (either as an Apple joke, or a third-party joke) use said hypothetical multi-touch capacity to turn the Apple Pencil into a kazoo/flute? (Or a Ressikan flute penny whistle for the Star Trek fans?). But that would need a separate tip or some device to pick up the signals and transmit them over a longer distance - or does the Apple Pencil use “normal range” Bluetooth?
Been wondering at the battery capacity of this thing. It seems to discharge much faster than the previous generation, but also charges much faster. I had a hopeful guess that maybe it was a capacitor and not lithium, increasing longevity and justifying the odd capacity quirks.
DNB Markets, DNB Bank ASA deeper and more brutal teardwon actually. There is a nRF52832 Bluetooth Low Energy chip from Nordic Semiconductor in there. Here is a ref from IHS. https://twitter.com/LeeRatliff/status/10...
-
-
-
Continua l'identificazione degli IC della Apple Pencil:
-
Accelerometro Bosch Sensortec BMA456 a tre assi
-
Amplificatore di corrente Maxim Integrated MAX44284
-
Controller di protezione sovratensioni Maxim Integrated MAX4971
-
Regulator ON Semiconductor NCP161AFCS180T2G 450 mA LDO
-
SiTime MEMS oscillator
Attempting u to _ charge - my apple pen on my apple watch charger -,- is this a bad idea?
-
-
-
Questo iPad Pro non è più tra noi: lo abbiamo ridotto ai suoi singoli costituenti!
-
È difficile dire se questa Mela è buona o cattiva. Ci sono una porta USB-C modulare e delle strisce allungabili per rimuovere la batteria, ma è ancora quasi tutto incollato insieme e c'è anche una striscia di tenace colla convenzionale per fissare la batteria.
-
Sembra che Apple stia cercando di cambiare, ma questa volta la voce tentatrice è stata un po' più forte di quella dell'angelo della riparabilità. Detto ciò, dato che i prodotti Apple di fine 2018 mostrano qualche miglioramento, speriamo che l'angelo della riparabilità stia guadagnando una maggiore considerazione.
Can you highlight the magnet locations? Maybe tear down the keyboard or folio case? Interested to know where the focus of the magnetic contact are. Might help with future case designs.
For magnets, you can’t do much better than the X-ray image in Step 2.
-
- La porta USB-C è modulare e può essere sostituita in modo indipendente.
- L'assenza di un pulsante home fisico elimina uno dei guasti più comuni e può semplificare le riparazioni.
- La batteria è fissata sia con strisce di estrazione allungabili sia con adesivo convenzionale e non rimovibile.
- L'LCD e il vetro del pannello frontale sono fusi insieme: è più semplice la procedura di apertura, ma cresce il costo della riparazione.
- Quasi tutto è tenuto in posizione da pezzi di adesivo, il che complica qualsiasi intervento.
Considerazioni Finali
Punteggio Riparabilità
(10 è il più facile da riparare)
Un ringraziamento speciale a questi traduttori:
100%
Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›
42 Commenti
Just a question on how these 2-cell batteries work…
If I’m on 50% battery charge, will both “sides” be half-full or will one be completely depleted?
The 2 cells are connected in parallel so they both drain at the same rate.
With the 1TB model having 6GB, is that achieved with a higher capacity part or is there space for a third RAM chip?
As I noticed the ram is installed on chip, it is unlikely there will be enough space for a third one
So either the 1TB version uses two 3GB RAM chips (not sure this size exists), or the A12X on the 1TB version offers up the additional 2GB internally, or the flash controller contains 2GB RAM that somehow gets mapped into the OS (doubt this). I have the 1TB version and am just curious how this is implemented.
tskwara -
There were 3GB LPDDR4 RAM chip offered by Samsung and were used in the iPhone 8 Plus. Not sure if it will be the case of the iPad Pro, but 3GB RAM did exist.
24 Gb (3 GB) LPDDR4X packages are definitely a thing, so most likely just two of those.
It said that there is 4GB in total
Concerning this picture from step 5: https://d3nevzfk7ii3be.cloudfront.net/ig...
Is there really so much unused/empty space on the left side of the enclosure or am I missing something here?
And could you provide the battery ratings for Apple Pencil 2?
If you look at the XRay photo and the screen assembly, you will find that these space are reserved for display cables.
Indeed, the display panel’s logic board occupies this space. In the last iPad Pro teardown, however, no extra space was needed.
Simon -
Well, in the iPad Pro 10.5 inch model this empty space is located on the bottom side of the enclosure.
Simon -
My guess is that it’s a loudspeaker enclosure, among other things it helps make the sound more punchy and less tinny from the 4 woofers
How did they get all those parts into the pencil?
Magic, Elves and Fairies at the FoxConn factory. All of the above have small hands! ;-)
Custom engineered enveloping and machining.
An apple shop representative in Miami, told me that, the 1tb model iPad Pro is on par with this you opened up and all the others, about the ram, so it is just 4gb.
she said the 6gb ram on the 1tb iPad Pro is only a rumor.
Has anyone evidence of this 6gb ram? If I can be sure about it I would buy that size of memory..
This firstly comes from Xcode which implies that there is a new iDevice with 6GB RAM, and it is very likely to be the new iPad Pro, as none of those iPhones get 6GB RAM.
GeekBench indicates that there are 4 models of iPad Pros has 6GB Memory: iPad8,2,iPad8,4,iPad8,6 and iPad8,8.
All of those models have “x“ in the Mother Board model name, and those names somehow connect from each other, for example: “J317xAP“ for iPad8,2; “J318xAP“ for iPad8,4; etc, and iPad8,8 got “J321xAP”.
In contrast, the ones with 4GB RAM do not have “x” in their Motherboard name. For example, iPad8,7 got “J321AP“, indicates that model is similar to iPad8,8, but the latter is an “enhanced x“ version.
The iPad pro 1TB model has 6GB of ram, but this is to help with the extra storage, no performance gains sadly.
Space -
What type of aluminium is the iPad Pro made from?
What about the extra Holes in this new iPad? There is one on the display front, right next to the FaceID Camera. And there is one on the left side in the middle. First i thought it is the SIM tray removal hole… but: i am using the WiFi model…
Microphones. The iPad has multiple mics to help with noice cancellation and for Hey Siri functionality.
djfriar -
The ability of the Face ID to work in both orientations is hw- or sw-based? Thanks.
please uninstall all Magnets! Over 100.. new wight ? Nothing is netter than a lightweight Tablet
If you compare the 11-inch to the 10.5 inch last year, the wifi model is actually lighter.
This also applies to the 12.9 vs 12.9
So those magnets did not make the tablet heavier. If you are comparing the 12.9 inch this year with 10.5 inch last year, of cause it is heavier
Can anyone give a definitive answer as to if the 1tb version has 6gb ram please.
I'm a total non tech so forgive my lack of tech
But I've read many reviews and learnt a little
Even one of the messages above refers to Xcode 'implies'
Still nothing definitive
Others say the geekbench tests don't prove 6gb but suggest
Got thru to Apple managers of both CPU and IOS department
- unbelievably they don't have a clue!
…and even they agreed Apple should publicise their specs
We all get why they don't but still…
Still no certainty after over 3 weeks of rumours.
Plus much debate over whether it'll make any difference for any but the uber power users
So probably only solution is a tear down of a 1tb
Have I missed this?
Even a hi tech apple store guy I know well said ifixit had a tear down to prove the 6gb
..but all I can't find this.
Seems like the only definitive answer is a tear down
Is this going to happen guys?
Thanks
Why do they have so many magnets in the speakers, I always thought a speaker needed one magnet to drive it’s respec driver?
what is the frame part made of, looks not strong enough to support the whole structure and will cause bending over time.
BE WARNED! the replacement screen does NOT come with the ambient light sensor attached. You will need to use your old one and unless you attach it perfectly (the sensors are held in place by hot glue), face ID will no longer work. If I were to do the repair again, I would spend the extra $100 and have Apple replace it.
Que son los flex que están incluidos en la pantalla? Dos inferiores y uno superior. Tengo un ipad a1980 con todos los flex cortados al separar la pantalla y no encuentro información para identificarlos.
The screen on my iPad is toast (tends to happen when you leave it on the roof of your car and drive down the interstate). I’m looking at purchasing a new screen from here, but have one question on it. The screen as shown in the teardown has connectors both top and bottom of the display, but the screen available for purchase only shows the bottom set of connectors. Is there a different assembly at the top of the display for something else, perhaps mic or ambient light sensor that I need to acquire?
Hi David,
You are right—those look like the ambient light sensors and mics. Try to detach them from your original display to transfer to your replacement screen. You may need to use some heat. Pry carefully with a non-metal tool.
If you replace the display with the one on Ifixit, does 120hz ProMotion go away when you replace the screen?
Gracias, un saludo desde Colombia, Que hay que hacer para montar una franquicia en mi país ?
Me dedico a Reparar cargadores de Mac, y computadores, cada vez me llegan mas clientes para que les alquile las herramientas y les diga cómo hacerlo, en su mayoría son estudiantes, o profesionales jóvenes que quieren relajarse contribuyendo al uso razonable, a reutilizar equipos desechados.
Hi,
nachdem mein Dipsplay defekt war und bei der demontage auch noch da flexkabel der FaceID gerissen war, musste ich mir ein neues einetzen.
Dennoch meldet das ipad nach dem Ersetzen der zwei Teile das die FaceID nicht funktioniert und der Stromverbauch ist enorm auffällig nach Oben gegangen. Kann es sein, das diese Flex mit Sensoren und cam, nicht ersetzt werden können (sollen)? Daher der hohe Stromverbauch
Gruß Matthias
I've replaced the screen on one of these and tried 3 other Digi/lcds and only the bottom portion where the swipe to unlock bar is will receive touch input, the bottom 1 cm of the screen if that. Is this an issue anyone's run into? If so did you find a solution and what might I try?
Purchased the usb dock from ifixit, they didn’t include any screws. How cheap they are.