Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo ZEN V Creative Media Player, usa il nostro manuale di assistenza.

  1. ZEN V Creative Media Player Teardown, ZEN V Creative Media Player Teardown: passo 1, immagine 1 di 3 ZEN V Creative Media Player Teardown, ZEN V Creative Media Player Teardown: passo 1, immagine 2 di 3 ZEN V Creative Media Player Teardown, ZEN V Creative Media Player Teardown: passo 1, immagine 3 di 3
    • Here we have Creative's ZEN V Media Player.

    • The Navigator Stick

    • The Play/Pause Button

    • The Back Button

    • The LCD

    • USB 2.0 Charging Port

    • Headphone Jack

    • Line In Jack

  2. ZEN V Creative Media Player Teardown: passo 2, immagine 1 di 3 ZEN V Creative Media Player Teardown: passo 2, immagine 2 di 3 ZEN V Creative Media Player Teardown: passo 2, immagine 3 di 3
    • Start by taking a pointy metal spudger and insert it on the bottom edge of the player

    • Slide it along, prying up until a gap forms

    • Proceed to insert and slide the tool along the left and right side of the device, until the plastic piece with the buttons comes free.

    • Half of the covering plastic should be off now

    • Gap between plastics

  3. ZEN V Creative Media Player Teardown: passo 3, immagine 1 di 3 ZEN V Creative Media Player Teardown: passo 3, immagine 2 di 3 ZEN V Creative Media Player Teardown: passo 3, immagine 3 di 3
    • While doing the following steps note that this piece is glued on to the LCD. Do not apply too much force or shove your tool too far in

    • Glue

    • Bring your tool to the top edge of the player and insert it

    • Insert it on the top edge and slide while prying up

    • The gap

    • Insert it on the two sides and pry until plastic comes loose

  4. ZEN V Creative Media Player Teardown: passo 4, immagine 1 di 2 ZEN V Creative Media Player Teardown: passo 4, immagine 2 di 2
    • Be very gentle with the LCD in the next 2 steps! It is glued to the logic board with black stick pads. Do not break the cable/clip!

    • Adhesive Pads

    • Cable Clip

    • Insert flat end of plastic spudger on the bottom of the LCD. Pry gently upwards.

    • Bottom of LCD

    • Insert on the sides and continue to pry.

    • Finally insert on the top and pry.

    • Top of LCD

  5. ZEN V Creative Media Player Teardown: passo 5, immagine 1 di 3 ZEN V Creative Media Player Teardown: passo 5, immagine 2 di 3 ZEN V Creative Media Player Teardown: passo 5, immagine 3 di 3
    • Pull back LCD to bottom of player to expose cable/clip

    • Remove orange ESD safe tape with spudger/fingernail

    • Orange ESD safe tape

    • Flip up the clip with flat end of spudger/fingernail

    • Clip is flipped up

    • Pull the LCD away from the player

  6. ZEN V Creative Media Player Teardown: passo 6, immagine 1 di 3 ZEN V Creative Media Player Teardown: passo 6, immagine 2 di 3 ZEN V Creative Media Player Teardown: passo 6, immagine 3 di 3
    • Put down your spudger and pick up a Phillips #000 Screwdriver

    • Remove the two screws on the logic board

    • Screws

    • Remove Volume control button by pulling it up off the board

    • Volume control button

    • Pull up board from bottom of player

    • Gently wiggle the logic board out of the casing. Be careful because it is connected to a battery underneath it

    • Battery

  7. ZEN V Creative Media Player Teardown: passo 7, immagine 1 di 3 ZEN V Creative Media Player Teardown: passo 7, immagine 2 di 3 ZEN V Creative Media Player Teardown: passo 7, immagine 3 di 3
    • Insert spudger under the top of the battery and pry

    • Top half of battery

    • There is an adhesive pad under the battery

    • Battery should now be free

    • Remove battery from case and set aside connected to the logic board

  8. ZEN V Creative Media Player Teardown: passo 8, immagine 1 di 1
    • Battery may now be removed from logic board with a soldering iron

    • Heat up the contacts and pull away wires

    • Contacts

  9. ZEN V Creative Media Player Teardown: passo 9, immagine 1 di 2 ZEN V Creative Media Player Teardown: passo 9, immagine 2 di 2
    • These all are various components that can be removed with a soldering iron

    • USB 2.0 Port has 4 pads and 5 pins attaching it to the logic board

    • Various Switches- 4 pads each. From the (Bottom left), Volume up, Volume Down, Mute?, (Top Left), Power on/Hold, Reset

    • Line In Jack 4 pads

    • Headphone Jack 4 pads

    • Play/Pause Button 2 pads and Back Button 2 pads

    • LCD connector and Navigtor button

  10. ZEN V Creative Media Player Teardown: passo 10, immagine 1 di 1
    • All the innards of the ZEN V Media Player

    • Button Plastic- Removed in Step 2

    • LCD Plastic- Removed in Step 3

    • Orange ESD Safe tape and LCD Screen- Removed in Step 5

    • Screws and Volume Button- Removed in Step 6

    • Back Plastic Case and Logic Board- Removed in Step 7

    • Battery Removed in Step 8

Liam Speirs

Membro da: 11/08/09

363 Reputazione

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 11

Tutti i Tempi: 13,556