Introduzione

Microsoft has launched a new version of its official Xbox One Wireless Controller. It has a 3.5mm stereo headset jack, which will allow most third-party gaming headsets to directly connect to the controller for the first time.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Xbox One Wireless Controller 1697, usa il nostro manuale di assistenza.

  1. Covert Forces model - Bowie 'Changes' look. New 3.5mm jack socket next to expansion port.
    • Covert Forces model - Bowie 'Changes' look.

    • New 3.5mm jack socket next to expansion port.

  2. Remove battery cover and battery Remove side panels using spudger Expose T9 security  screw under label
    • Remove battery cover and battery

    • Remove side panels using spudger

    • Expose T9 security screw under label

    • Remove 5 x T9 security screws from chassis

    • Remove top and bottom covers

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Remove 2 x T6 security screws on bottom PCB De-solder rumble pack and trigger wiring
    • Remove 2 x T6 security screws on bottom PCB

    • De-solder rumble pack and trigger wiring

  5. Thar she blows! DA7212 Dialog Semiconductor CODEC with Class G HP AMP and Class AB speaker driver.
    • Thar she blows! DA7212

    • Dialog Semiconductor CODEC with Class G HP AMP and Class AB speaker driver.

    • CODEC sits next to contact pads for 3.5mm jack socket

Bito Zapata

Membro da: 27/08/2015

144 Reputazione

1 Guida realizzata

Is it possible to show the other board? Was thinking of doing a scuf-style mod to one of these... Thanks

blazeclarkebcc - Replica

Was asking this because the boards are different to the older controller. I have PCB prints of the old one, but not the new one. Thanks.

blazeclarkebcc -

Anybody know where I can get the new style bumpers for this style of controller? Any help would be greatly appreciated.

Rhys Jones - Replica

The guy I buy from on ebay said they would be available at the end of January

themadmaxof07 -

I wonder if using this on-board solution should sound better than the external "puck" adapters.

I've opened the original Xbox Stereo Headset Adapter as well as the Turtle Beach Ear Force which both use a TI AIC3204 http://www.ti.com/product/TLV320AIC3204

I get a lot of noise/hiss when using these on both headsets.

Von Braun - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 13

Ultimi 7 Giorni: 102

Ultimi 30 Giorni: 520

Tutti i Tempi: 40,000