Aggiusta la tua roba Comunità Store

Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Valve Nodes Teardown

Scritto Da: Nicholas Jeng (e 2 altri collaboratori)
Pubblicato: March 16, 2018
  • Commenti: 0
  • Preferiti: 0
  • Visualizzazioni: 425

Valve Nodes Teardown

Scritto Da: Nicholas Jeng (e 2 altri collaboratori)
Pubblicato: March 16, 2018
  • Commenti: 0
  • Preferiti: 0
  • Visualizzazioni: 425

Smontaggio

Introduzione

In this teardown, you will be shown how to take apart (and reassemble) an Open-Storm valve node pair.

Cosa ti serve

  1. Valve Nodes Teardown, Tools Required: passo 1, immagine 1 di 1

    • You will need 2 small screwdrivers 2 large screwdrivers

    • 2x flat head

    • One ~5/64

    • One ~ 1/2

    • 2x Phillips

    • One #1

    • One #2 ( x 4)

    Modifica

  2. Valve Nodes Teardown, Nodes Overview: passo 2, immagine 1 di 3 Valve Nodes Teardown, Nodes Overview: passo 2, immagine 2 di 3 Valve Nodes Teardown, Nodes Overview: passo 2, immagine 3 di 3

    • Here we can see the two fully built nodes for the valve. We will use this as the starting point for our teardown.

    Modifica

  3. Valve Nodes Teardown, Unplug Batteries: passo 3, immagine 1 di 3 Valve Nodes Teardown, Unplug Batteries: passo 3, immagine 2 di 3 Valve Nodes Teardown, Unplug Batteries: passo 3, immagine 3 di 3

    • For the large node unclip the battery

    • For the smaller node, detach the battery from the solar charger

    Modifica

  4. Valve Nodes Teardown, Large Node Step 1: Disconnect and Remove the Relays: passo 4, immagine 1 di 3 Valve Nodes Teardown, Large Node Step 1: Disconnect and Remove the Relays: passo 4, immagine 2 di 3 Valve Nodes Teardown, Large Node Step 1: Disconnect and Remove the Relays: passo 4, immagine 3 di 3

    • Ensure battery is disconnected

    • You will use both types of (small) screwdrivers

    Modifica

  5. Valve Nodes Teardown, Large Node Step 2: Disconnect the Wires from the SunSaver Duo: passo 5, immagine 1 di 2 Valve Nodes Teardown, Large Node Step 2: Disconnect the Wires from the SunSaver Duo: passo 5, immagine 2 di 2

    • Use the (large) flat head screwdriver

    Modifica

  7. Valve Nodes Teardown, Large Node Step 3: Remove Components and Wires from Node: passo 6, immagine 1 di 3 Valve Nodes Teardown, Large Node Step 3: Remove Components and Wires from Node: passo 6, immagine 2 di 3 Valve Nodes Teardown, Large Node Step 3: Remove Components and Wires from Node: passo 6, immagine 3 di 3

    • The switch will most likely still be connected to the small node and will not be able to be fully removed. We recommend removing it from the enclosure to make it tidy

    Modifica

  8. Valve Nodes Teardown, Large Node Step 4: Unscrew and Remove the SunSaver Duo: passo 7, immagine 1 di 2 Valve Nodes Teardown, Large Node Step 4: Unscrew and Remove the SunSaver Duo: passo 7, immagine 2 di 2

    • Use the (large) Phillips screwdriver

    Modifica

  9. Valve Nodes Teardown, Large Node Step 5: Component Overview: passo 8, immagine 1 di 2 Valve Nodes Teardown, Large Node Step 5: Component Overview: passo 8, immagine 2 di 2

    • We have provided a picture of the inside of the enclosure to depict what will still remain inside

    • With the interior of the large node removed, these are the components we have (from left to right):

    • SunSaver Duo

    • Relays

    • Battery

    • Battery Wires/Connectors

    • Switch (still connected to the small enclosure via the conduit)

    Modifica

  10. Valve Nodes Teardown, Small Node Step 1: Disconnect the Solar Charger: passo 9, immagine 1 di 3 Valve Nodes Teardown, Small Node Step 1: Disconnect the Solar Charger: passo 9, immagine 2 di 3 Valve Nodes Teardown, Small Node Step 1: Disconnect the Solar Charger: passo 9, immagine 3 di 3

    • With the battery removed, our first step will be to remove the solar charger:

    • Pull out the solar charger terminal from the board

    • Unscrew the green wire from the solar charger using the (small) flat head screwdriver

    Modifica

  11. Valve Nodes Teardown, Small Node Step 2: Unclip the Module: passo 10, immagine 1 di 3 Valve Nodes Teardown, Small Node Step 2: Unclip the Module: passo 10, immagine 2 di 3 Valve Nodes Teardown, Small Node Step 2: Unclip the Module: passo 10, immagine 3 di 3

    • Pull the module from the bottom; pulling the module in a different way may damage it

    Modifica

  12. Valve Nodes Teardown, Small Node Step 3: Unscrew the Board: passo 11, immagine 1 di 2 Valve Nodes Teardown, Small Node Step 3: Unscrew the Board: passo 11, immagine 2 di 2

    • Use the (small) Phillips screwdriver

    Modifica

  13. Valve Nodes Teardown, Step 4: Remove Terminals from Board: passo 12, immagine 1 di 3 Valve Nodes Teardown, Step 4: Remove Terminals from Board: passo 12, immagine 2 di 3 Valve Nodes Teardown, Step 4: Remove Terminals from Board: passo 12, immagine 3 di 3

    • For this step, we recommend you record the current location of the current wires/terminals or refer to our pin documentation for reassembly purposes

    • Pin Documentation

    Modifica

  14. Valve Nodes Teardown, Small Node Step 5: Component Overview: passo 13, immagine 1 di 2 Valve Nodes Teardown, Small Node Step 5: Component Overview: passo 13, immagine 2 di 2

    • We have provided a picture of the inside of the enclosure to depict what will still remain inside

    • With the interior of the small node removed, these are the components we should have (from left to right)

    • Solar charger with an attached terminal

    • Cell module with attached antenna on the "ANT" and "GPS" pins

    • Board with the four screws

    • The battery

    Modifica

Autore

con 2 altri collaboratori

Nicholas Jeng

Membro da: 01/16/18

529 Reputazione

3 Guide realizzate

Distintivi: 2

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 425