Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Uniden EXP 371, usa il nostro manuale di assistenza.

  1. Uniden EXP 371 Teardown, Uniden EXP 371 Teardown: passo 1, immagine 1 di 1
    • Uniden EXP371 900 MHz Cordless Phone.

    • 900 MHz Extended Range with One Touch RocketDial/Find Handset Locator and is Desk or Wall Mountable.

  2. Uniden EXP 371 Teardown: passo 2, immagine 1 di 2 Uniden EXP 371 Teardown: passo 2, immagine 2 di 2
    • Remove the battery by first pressing down on the rear of the cover and pushing the cover towards the bottom of the phone.

    • Next remove the battery by pulling on the connector.

  3. Uniden EXP 371 Teardown: passo 3, immagine 1 di 2 Uniden EXP 371 Teardown: passo 3, immagine 2 di 2
    • Next remove the two screws at the bottom of the phone with a PH1 philips screwdriver.

    • Now remove the top portion of the case from the bottom. This may be difficult to do with your bare hands. The use of a plastic opening tool may come in handy.

  4. Uniden EXP 371 Teardown: passo 4, immagine 1 di 3 Uniden EXP 371 Teardown: passo 4, immagine 2 di 3 Uniden EXP 371 Teardown: passo 4, immagine 3 di 3
    • Your next step is to remove the five screws holding down the motherboard. Use the PH1 philips screwdriver.

    • Once you have removed the five screws you may lift the motherboard off of the front case.

    • At this point you may also remove the dial pad. It simply lifts off.

    • You may also remove the speaker if needed by unscrewing the two screws using the PH1 philips screwdriver.

    • The whole phone is now disassembled at this point.

Tim Reimer

Membro da: 06/19/10

165 Reputazione

3 Guide realizzate

Un commento

this guide is poorly written, please delete or improve it.

Walker Quine - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 4,566