Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Toy Microscope, usa il nostro manuale di assistenza.

  1. Toy Microscope Teardown, Toy Microscope Teardown: passo 1, immagine 1 di 3 Toy Microscope Teardown, Toy Microscope Teardown: passo 1, immagine 2 di 3 Toy Microscope Teardown, Toy Microscope Teardown: passo 1, immagine 3 di 3
    • The microscope package (that's right, some items were lost and the box suffered)

    • The back of the box with all its items.

    • The useful piece of the microscope package: the microscope (not very surprising...)

  2. Toy Microscope Teardown: passo 2, immagine 1 di 3 Toy Microscope Teardown: passo 2, immagine 2 di 3 Toy Microscope Teardown: passo 2, immagine 3 di 3
    • Now, let's begin the operation: we'll begin with the pedestal. No need for screwdrivers, you just have to pull it.

    • After this, there's a screw. Let's remove it.

    • Once you did it, the battery compartment can be removed.

    • Note: if you want to remove the pedestal completely, you may need to cut the both wires.

    • Note 2: from now on, the microscope will be more difficult to reassemble.

  3. Toy Microscope Teardown: passo 3, immagine 1 di 3 Toy Microscope Teardown: passo 3, immagine 2 di 3 Toy Microscope Teardown: passo 3, immagine 3 di 3
    • Then, this rotative piece is, in a side, a mirror and in the another, a lamp (hence the 1.5x2 batteries in the step 2).

    • To remove it, you need pull a side. The rest will come alone.

    • The picture is a little fuzzy but we can see:

    • The bulb.

    • The support of this rotative piece.

    • The battery.

    • The cover which prevents the bulb to fall.

    • The mirror and the bulb location

  4. Toy Microscope Teardown: passo 4, immagine 1 di 2 Toy Microscope Teardown: passo 4, immagine 2 di 2
    • Now, remove the big Phillips screw here (actually, you can loosen it then remove the nut in the other side). Don't be worried if it's a little hard to pull the screw.

  5. Toy Microscope Teardown: passo 5, immagine 1 di 2 Toy Microscope Teardown: passo 5, immagine 2 di 2
    • Next step: remove the plate (it's here that you put the item to analyze): 2 Phillips screws.

  6. Toy Microscope Teardown: passo 6, immagine 1 di 3 Toy Microscope Teardown: passo 6, immagine 2 di 3 Toy Microscope Teardown: passo 6, immagine 3 di 3
    • This piece allows you to change the growth. 1 screw.

    • If you turn this piece, the growth will be modified thanks to these magnifying glasses (red circles)

    • To remove them, you need to use a sharp piece (e.g a pen) and press on the 3 holes marked on blue.

  7. Toy Microscope Teardown: passo 7, immagine 1 di 1
    • You can easily pull off the black part.

  8. Toy Microscope Teardown: passo 8, immagine 1 di 1
    • After removing the black part (step 6), turn the wheel until you withdraw the lens.

  9. Toy Microscope Teardown: passo 9, immagine 1 di 2 Toy Microscope Teardown: passo 9, immagine 2 di 2
    • This mechanical wheel allows you to hang over or hold off the lens in order to improve the clearness.

    • If you like unscrew whatever you find, there are 2 screws.

  10. Toy Microscope Teardown: passo 10, immagine 1 di 2 Toy Microscope Teardown: passo 10, immagine 2 di 2
    • Now, let's analyze the lens.

    • You just have to pull the different parts.

  11. Toy Microscope Teardown: passo 11, immagine 1 di 2 Toy Microscope Teardown: passo 11, immagine 2 di 2
    • The lens which enlarges the item to analyze from 12 to 18 times.

    • A tube, without magnifiers.

  12. Toy Microscope Teardown: passo 12, immagine 1 di 1
    • Here, that was the consequences when you lend me a microscope. RIP.

    • In the bottom right corner, you can see the perpetrators of this teardown.

Bob

Membro da: 04/17/10

760 Reputazione

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 14

Tutti i Tempi: 6,669