Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Technicolor TC7200.U, usa il nostro manuale di assistenza.

  1. Technicolor TC7200.U Teardown, remove top cover: passo 1, immagine 1 di 3 Technicolor TC7200.U Teardown, remove top cover: passo 1, immagine 2 di 3 Technicolor TC7200.U Teardown, remove top cover: passo 1, immagine 3 di 3
    • Remove the 2 rubber feet covering up the screws holding the top cover.

    • Unscrew the T10 screws.

    • Use the spudger to pry open the top cover and remove it.

  2. Technicolor TC7200.U Teardown, remove board from case: passo 2, immagine 1 di 2 Technicolor TC7200.U Teardown, remove board from case: passo 2, immagine 2 di 2
    • It this point, the board is held in place by the case itself.

    • Bend the front side of the case outward, allowing the board to move up.

    • With the front side removed from the case, slide the backside of the board from the case as well

  3. Technicolor TC7200.U Teardown, separate case from board: passo 3, immagine 1 di 2 Technicolor TC7200.U Teardown, separate case from board: passo 3, immagine 2 di 2
    • Two parts are still attached to the case.

    • Use the spudger to separate the glued on part from the case and repeat on the other side.

  4. Technicolor TC7200.U Teardown, explore the board: passo 4, immagine 1 di 3 Technicolor TC7200.U Teardown, explore the board: passo 4, immagine 2 di 3 Technicolor TC7200.U Teardown, explore the board: passo 4, immagine 3 di 3
    • Remove the lid of the cable case.

    • View the board

    • Bothhand GS5014LF

    • STMicroelectronics NAND512W3A2CN6

    • Unscrew the WiFi module.

knipwim

Membro da: 09/01/18

8.685 Reputazione

31 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 32

Tutti i Tempi: 857