Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Strumenti necessari in questo Smontaggio

Introduzione

Just wanna see how this panda make his sound?

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Speakal iPanda, usa il nostro manuale di assistenza.

  1. The happy Panda
    • The happy Panda

  2. Flip it to find the screws. Unscrew the four Phillips #0 screws. Unscrew the four Phillips #0 screws.
    • Flip it to find the screws.

    • Unscrew the four Phillips #0 screws.

  3. Be careful with the cables of the subwoofer. Be careful with the cables of the subwoofer.
    • Be careful with the cables of the subwoofer.

  4. Kit cacciaviti Manta

    112 punte per ogni riparazione.

    Upgrade Your Toolbox

    Kit cacciaviti Manta

    Upgrade Your Toolbox
  5. He look like this on his insides. there is a little lock on the sides.
    • He look like this on his insides.

    • there is a little lock on the sides.

    • Don't forget these screws too.

  6. Opening the sandwich. Don't forget the cables!
    • Opening the sandwich.

    • Don't forget the cables!

  7. It doens't look like a panda anymore. It doens't look like a panda anymore. It doens't look like a panda anymore.
    • It doens't look like a panda anymore.

  8. Removing the board, it's all done.
    • Removing the board, it's all done.

  9. Poor panda... Poor panda...
    • Poor panda...

paulostool

Membro da: 06/06/2011

121 Reputazione

1 Guida realizzata

Hi!

I have just wondered about tweeter type.

I have a pig, bud one of it's tweeters is dead.

Do you have any idea how to get a replacement tweeter?

THX!!

sonofhoegaarden - Replica

Hello All,

Please can you assist me with sourcing a amplifier board for the Shox Panda as above in the panda tear down. My panda is supplying 12 Vots DC to the woofer. Thanks very much.

Peter Boucher - Replica

Hi Peter, you may consider swapping the actual CD7377CZ Audio Amp for a ST Microelectronics TDA7375V, and probably the RM2576-5.0 voltage regulator with a Texas Instruments LM2576-5.0, both of which are drop-in replacement (as parts are chinese knock-offs).

Cheers !

grogcw - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 18

Tutti i Tempi: 4,623