Salta al contenuto principale

Strumenti necessari in questo Smontaggio

Introduzione

I have a PlayStation 1, and i have decided to make a new teardown of it.

I'm spanish, so my english is a bit poor, and sorry for the mistakes made in this teardown.

Without further delay, we start.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo PlayStation, usa il nostro manuale di assistenza.

  1. Here's the PS1. Turn the PS1 over and remove the six screws.
    • Here's the PS1.

    • Turn the PS1 over and remove the six screws.

  2. Remove the top cover. It's very easy.
    • Remove the top cover. It's very easy.

  3. Disconnect both CD-ROM connectors.
    • Disconnect both CD-ROM connectors.

    • CD connector one and the socket it connects to.

    • CD connector two and the socket it connects to.

  4. Remove the CD-ROM reader. You should be able to pull it out gently, although you may have to wiggle it around a bit to loosen the rubber holders. Remove the CD-ROM reader. You should be able to pull it out gently, although you may have to wiggle it around a bit to loosen the rubber holders.
    • Remove the CD-ROM reader. You should be able to pull it out gently, although you may have to wiggle it around a bit to loosen the rubber holders.

  5. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  6. Detach both cables. They go to the power supply and to the memory cards and controller connectors.
    • Detach both cables. They go to the power supply and to the memory cards and controller connectors.

  7. Remove the four screws and the metal cover.
    • Remove the four screws and the metal cover.

  8. Now you have the motherboard!
    • Now you have the motherboard!

    • And the power supply.

    • Remove the four screws from the motherboard and the power supply.

  9. Once the screws are removed, remove the power supply.
    • Once the screws are removed, remove the power supply.

  10. Remove the motherboard, and both of the screws from the memory card/ controller connection mechanism.
    • Remove the motherboard, and both of the screws from the memory card/ controller connection mechanism.

  11. Now, you have all your PlayStation 1 parts!
    • Now, you have all your PlayStation 1 parts!

    • Main Board

    • Lower Casing

    • EMI Shield

    • Power Supply

    • Disk Reader

    • Memory Card/ Controller Mechanism

imacg517

Membro da: 06/05/2010

164 Reputazione

1 Guida realizzata

That’s a PAL PS1. May be different from NTSC models.

Daniel Powers - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 32

Ultimi 30 Giorni: 191

Tutti i Tempi: 19,482