Aggiusta la tua roba Comunità Store

Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement

Introduzione

Tearing down my DPTA-RS1 stylus and replacing the dead li-ion battery without damaging the cosmetics.

Cosa ti serve

  1. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Loosen the Tip: passo 1, immagine 1 di 2 Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Loosen the Tip: passo 1, immagine 2 di 2

    • The tip is glued-in-place. You need to wiggle it with force to loosen the glue.

    • Do not use clamps or pliers to hold the tip. You may risk damaging the capacitive coil underneath.

    Modifica

  2. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Remove the Buttons: passo 2, immagine 1 di 1

    • The internals are now held in place by the plastic buttons. Remove them to proceed

    • Use a prying tool to remove the buttons. The middle pivot is a good entry point.

    Modifica

  4. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement: passo 3, immagine 1 di 1

    • With the buttons removed, you can now slide out the guts in the tip's direction. You can now perform a battery replacement.

    Modifica

  5. Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement, Take a look inside: passo 4, immagine 1 di 1

    • Apparently, the pen is built by Hanvon and is powered by ATMEL's (now Microchip's) maXStylus Technology.

    • ATMEL maXStylus mXTS220 Capacitive Stylus Driver

    • TI BQ24232RGTR Li-ion Battery Charger

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

A. Lithia

Membro da: 03/23/23

149 Reputazione

1 Guida realizzata

Distintivi: 4

+ 1 altro distintivo

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 99

Tutti i Tempi: 204