Strumenti necessari in questo Smontaggio

Introduzione

For our reverse engineering project, we chose to use the smoke detector. This smoke detector consists of a sensor to detect smoke and a loud electronic buzzer to alert people within the building.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Gas and Smoke Detector, usa il nostro manuale di assistenza.

  1. Use a screwdriver to pry open the plastic enclosure. It might be easier to push the buzzer through the hole, if you need extra leverage.
    • Use a screwdriver to pry open the plastic enclosure. It might be easier to push the buzzer through the hole, if you need extra leverage.

    Aggiungi Commento

  2. The buzzer is unhooked from the PCB board, by hands.
    • The buzzer is unhooked from the PCB board, by hands.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • This is the circuit for the smoke detector. It is powered by a 9V battery. The 3 metal leafs are contacts for the buzzer and the bigger leaf is for the test button.

    Aggiungi Commento

    • The metal cap is removed to reveal a, MC145017, driver chip and americium sensor. Do not remove americium from the sensor!

    why did you do this do you know how dangerous that is americium 231 is a highly radioactive metal you could HAVE KILLED YOURSELVES

    alexander matthiessen - Replica

Ari Dubinsky

Membro da: 04/03/2014

253 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 37

Ultimi 30 Giorni: 113

Tutti i Tempi: 4,320