Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Strumenti necessari in questo Smontaggio

Introduzione

This is a Sega Genesis model 2. In this tear down you will be able to see what the inside of the Sega Genesis should look like.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Sega Genesis II, usa il nostro manuale di assistenza.

  1. Flip the system over
    • Flip the system over

  2. Remove the four outer screws (you may want a small cup to keep your screws in.) Remove the four outer screws (you may want a small cup to keep your screws in.)
    • Remove the four outer screws (you may want a small cup to keep your screws in.)

  3. Take plastic top off.
    • Take plastic top off.

  4. Remove the nine inner screws.
    • Remove the nine inner screws.

  5. Remove metal piece.
    • Remove metal piece.

  6. You now have access to your circuit board. (If you wish to remove the circuit board, continue.)
    • You now have access to your circuit board. (If you wish to remove the circuit board, continue.)

  7. Remove the two screws highlighted in picture to remove the circuit board.
    • Remove the two screws highlighted in picture to remove the circuit board.

  8. Lift the black piece of plactic up.
    • Lift the black piece of plactic up.

  9. Lift up the metal piece.
    • Lift up the metal piece.

  10. You now have access to the inside of the bottom plastic piece.
    • You now have access to the inside of the bottom plastic piece.

  11. This is the circuit board. This is the circuit board. This is the circuit board.
    • This is the circuit board.

  12. Do the steps backwards to reassemble.
    • Do the steps backwards to reassemble.

Thor Odinson

Membro da: 04/06/2015

152 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 70

Tutti i Tempi: 6,288