Aggiusta la tua roba Comunità Store

SYNOLOGY DS718+ Teardown

Introduzione

Here's a step-by-step tutorial to dismount each piece of the NAS until you reach the motherboard.

'Note: the interest of this tutorial is however limited.'

Indeed, most of the components that a user can be brought to add or change are now accessible directly, without disassembly (storage disks, memory expansion).

*This is a step forward, the previous revision must be completely removed to change a single RAM array.

Only the memory stack on the motherboard and fans remain inaccessible directly and require the disassembly of the NAS described in this tutorial to be changed (whether they are HS or replace them by better components).

The dismantling time is estimated at one hour (but with photographies). That said, it is certainly achievable in 20/30 minutes.

The photographs were taken with an iPhone SE, using a portable LED studio.

  • : info. must be checked.

  1. SYNOLOGY DS718+ Teardown, Case presentation: front panel: passo 1, immagine 1 di 1

    • This NAS DS718 + is equipped with 4 GB of RAM (6 GB max.), an INTEL Celeron J3455 64-bit Quad processor, two bays for SATA drives (HDD, or SSD).

    • FRONT PANEL : you can notice on the right side, disks LEDs disapeared. You can find them now just on the top of the disk bays.

    • status LEDs

    • power buton (startup / shutdown)

    • 1 x USB 3 port

    • "copy" buton

    • 2 x disk support (caddy / cage)

    • disk bay lock

    Traduci

  2. SYNOLOGY DS718+ Teardown, Cas presentation: rear panel: passo 2, immagine 1 di 1

    • REAR PANEL

    • 1 x 92mm fan

    • 2 x EHTERNET RJ45 Gigabit port

    • 2 x USB 3 port

    • 1 x eSATA port

    • 1 x power connector

    • 1 x Kensington security incision (K-lock)

    • RESET buton

    Traduci

  3. SYNOLOGY DS718+ Teardown, Backplane and memory access: passo 3, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Backplane and memory access: passo 3, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Backplane and memory access: passo 3, immagine 3 di 3

    • Before teardown, unlock the disk media with the key.

    • It's a new appreciable feature, the memory slots are now directly reachable.

    • first memory slot

    • seonc memory slot (not populated)

    • The previous revision (DS716+ II) allowed this operation but a piece of metal prevent to remove memory.

    Traduci

  4. SYNOLOGY DS718+ Teardown, Teardown: Rear Panel - Step 1 / 3: passo 4, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teardown: Rear Panel - Step 1 / 3: passo 4, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teardown: Rear Panel - Step 1 / 3: passo 4, immagine 3 di 3

    • 1 - Remove the two screws placed under the NAS, on rear side.

    • 2 - Remove the screw placed in the middle of the rear panel.

    Traduci

  5. SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 2 / 3: passo 5, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 2 / 3: passo 5, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 2 / 3: passo 5, immagine 3 di 3

    • To remove the rear panel …

    • slightly pull the lower part of the rear panel so that the lugs do not touch the case, then ...

    • drag the facade upwards …

    • The back cover is held by two notches into the case.

    Traduci

  7. SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 3 / 3: passo 6, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 3 / 3: passo 6, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teardown: rear panel - step 3 / 3: passo 6, immagine 3 di 3

    • Once removed, remove the fan connector from the motherboard.

    Traduci

  8. SYNOLOGY DS718+ Teardown, Removing the Metal Housing: passo 7, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Removing the Metal Housing: passo 7, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Removing the Metal Housing: passo 7, immagine 3 di 3

    • Once the rear panel is removed, the housing can be removed. To do so drag the cover about 1 cm to the back of the NAS then lift the hood upwards.

    Traduci

  9. SYNOLOGY DS718+ Teardown, Naked case before disassembling metal housing: passo 8, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Naked case before disassembling metal housing: passo 8, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Naked case before disassembling metal housing: passo 8, immagine 3 di 3

    • Now remains the front to remove ...

    • Here are some photographs of the case and the internal structure + screws.

    Traduci

  10. SYNOLOGY DS718+ Teardown, Teradown: front panel - step 1 / 2: passo 9, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teradown: front panel - step 1 / 2: passo 9, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teradown: front panel - step 1 / 2: passo 9, immagine 3 di 3

    • Remove the two screws under the box on the front side and then ...

    • in the same way as for the rear panel, lift the hood slightly ...

    Traduci

  11. SYNOLOGY DS718+ Teardown, Teardown: front panel - step 2 / 2: passo 10, immagine 1 di 2 SYNOLOGY DS718+ Teardown, Teardown: front panel - step 2 / 2: passo 10, immagine 2 di 2

    • and remove the front panel …

    Traduci

  12. SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 1/3: passo 11, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 1/3: passo 11, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 1/3: passo 11, immagine 3 di 3

    • x 4 screws to remove …

    • x 2 on the right side panel

    • and x 2 on the upper part

    Traduci

  13. SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 2/3: passo 12, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 2/3: passo 12, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 2/3: passo 12, immagine 3 di 3

    • This part is delicate to assembly as to disassembly. Read full instructions carefully before handling.

    • The guidance remains relatively accurate but the connector for the LED card drives is fragile. Do not force when removing or inserting the side flange.

    • electronic card LED disks

    • riser for SATA backplane (electronic card or daughter card)

    • electronic card riser (USB and e-SATA)

    Traduci

  14. SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 3/3: passo 13, immagine 1 di 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 3/3: passo 13, immagine 2 di 3 SYNOLOGY DS718+ Teardown, Teardown: crankcase and expansion card 3/3: passo 13, immagine 3 di 3

    • INSTRUCTIONS :

    • use both hands ...

    • pull gradually ...

    • everything must come without forcing!

    • Pay attention also to the metallic tape ... take it off if possible!

    Traduci

  15. SYNOLOGY DS718+ Teardown, Teardown: motherboard and memory: passo 14, immagine 1 di 2 SYNOLOGY DS718+ Teardown, Teardown: motherboard and memory: passo 14, immagine 2 di 2

    • motherboard (processor side)

    • memory card

    • last pictures are bad …

    Traduci
Conclusione

To reassemble your device, follow the instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

fr en

100%

Sébastien

Cameron Hen

Annika Faelker

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Autore

con 3 altri collaboratori

Sébastien

Membro da: 12/14/15

4.060 Reputazione

6 Guide realizzate

Distintivi: 20

+17 altri distintivi

Team

AEM (ANIMA EX MACHINA) Membro di AEM (ANIMA EX MACHINA)

Business

1 Membro

14 Guide realizzate

4 Commenti

1 hour? I did it in 20 minutes that's teardown and reassembly!!?!

Ken Richner - Replica

PLZ read the introduction more carefully !

Sébastien -

How to replace a larger heat pipe radiator？？

love3kkk - Replica

Any suggestions on Mother board update for the DS218+ & DS718+ ?

WA FOR SALE - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 28

Ultimi 30 Giorni: 120

Tutti i Tempi: 7,678