Strumenti necessari in questo Smontaggio

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Ryobi heat gun EHG2000, usa il nostro manuale di assistenza.

  1. Remove black plastic nose cowling by twisting anti-clockwise Remove black plastic nose cowling by twisting anti-clockwise
    • Remove black plastic nose cowling by twisting anti-clockwise

  2. Remove Philips head screws - 7 places Remove wire clip
    • Remove Philips head screws - 7 places

    • Remove wire clip

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. With a sharp blade cut the adhesive label inline with the split line of where the outer housings meet.
    • With a sharp blade cut the adhesive label inline with the split line of where the outer housings meet.

  5. Remove top half housings leaving subassemblies and parts on lower housing
    • Remove top half housings leaving subassemblies and parts on lower housing

  6. Internal parts
    • Internal parts

    • Motor

    • Heater element - stainless steel

    • PCB (Printed circuit board)

    • LED and Lens - Acrylic injection moulding

    • Switch assembly - ABS injection moulding

    • Housing - PC-ABC Injection moulding

Miles Park

Membro da: 31/03/2017

121 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 24

Tutti i Tempi: 453