Salta al contenuto principale

Strumenti necessari in questo Smontaggio

Introduzione

I've found a vacuum in my utility room. Since I almost never use it, I thought it was a good idea to see how it works... So let's go!!

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Rowenta AC6221, usa il nostro manuale di assistenza.

  1. Rowenta AC6221 Teardown, Rowenta AC6221 Teardown: passo 1, immagine 1 di 3 Rowenta AC6221 Teardown, Rowenta AC6221 Teardown: passo 1, immagine 2 di 3 Rowenta AC6221 Teardown, Rowenta AC6221 Teardown: passo 1, immagine 3 di 3
    • The 4.8 Rowenta vacuum can be used for a variety of purposes.

    • It is charged through its pedestal. The power of the pedestal is:

    • Input: 230V - 50 Hz - 7W (AC)

    • Output: 7.5V - 300 mA (DC)

  2. Rowenta AC6221 Teardown: passo 2, immagine 1 di 3 Rowenta AC6221 Teardown: passo 2, immagine 2 di 3 Rowenta AC6221 Teardown: passo 2, immagine 3 di 3
    • This vacuum has several parts:

    • The tip

    • The reservoir which holds the dust and debris

    • The engine (4.8V)

    • The pedestal

    • The power supply

    • From top to bottom, the reservoir contains 3 parts: the housing, container, and filter.

  3. Rowenta AC6221 Teardown: passo 3, immagine 1 di 3 Rowenta AC6221 Teardown: passo 3, immagine 2 di 3 Rowenta AC6221 Teardown: passo 3, immagine 3 di 3
    • Remove the two outer Philips #00 screws from the bottom of the engine.

    • The back of the circuit board will now be visible.

  4. Rowenta AC6221 Teardown: passo 4, immagine 1 di 3 Rowenta AC6221 Teardown: passo 4, immagine 2 di 3 Rowenta AC6221 Teardown: passo 4, immagine 3 di 3
    • Remove the two inner screws.

    • Insert a flat screwdriver between the cover and the base of the engine and remove the cover.

    • The wires of the vacuum are now visible.

  5. Rowenta AC6221 Teardown: passo 6, immagine 1 di 2 Rowenta AC6221 Teardown: passo 6, immagine 2 di 2
    • The wires of the vacuum are now visible.

    • The wires connect the charger light, switch,engine, and power wires.

    • The green box labels the engine.

    • The orange box labels one of the four batteries (4*1.2V)

  6. Rowenta AC6221 Teardown: passo 7, immagine 1 di 2 Rowenta AC6221 Teardown: passo 7, immagine 2 di 2
    • The top of the circuit board contains components including capacitors, resistors, wires, and a chip.

    • The bottom side shows the tracks that connect the components.

  7. Rowenta AC6221 Teardown: passo 8, immagine 1 di 2 Rowenta AC6221 Teardown: passo 8, immagine 2 di 2
    • Remove the screw securing the handle with a screwdriver.

    • Open the handle to see the inside using the flat screwdriver.

    • Warning: The handle is difficult to open

    • Warning: In this procedure, the handle was not opened to keep the vacuum intact.

  8. Rowenta AC6221 Teardown: passo 9, immagine 1 di 1
    • This is the pedestal that will be torn down.

  9. Rowenta AC6221 Teardown: passo 10, immagine 1 di 3 Rowenta AC6221 Teardown: passo 10, immagine 2 di 3 Rowenta AC6221 Teardown: passo 10, immagine 3 di 3
    • At the bottom of the pedestal, remove the 4 rubber pieces.

    • Note: This step provides access to 4 Philips screws.

    • Remove screws using a screwdriver.

  10. Rowenta AC6221 Teardown: passo 11, immagine 1 di 1
    • Lift the plastic piece carefully from the bottom of the pedestal.

  11. Rowenta AC6221 Teardown: passo 12, immagine 1 di 1
    • Inside the pedestal, the power cable separates into 2 wires. Each wire is connected to a conductive piece.

    • This completes the vacum cleaner teardown

Bob

Membro da: 17/04/2010

760 Reputazione

3 Guide realizzate

Un commento

This could use some discussion of how to replace the rechargeable batteries used in portable vacuum cleaners.

Wayne Seltzer - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 24

Tutti i Tempi: 6,724