Smontaggio
Questo smontaggio non è una guida di riparazione. Per riparare il tuo NES Cartridge, usa il nostro manuale di assistenza.
Flip the cartridge face-down on your table.
Use a 3.8 mm gamebit screwdriver to undo the 3 screws on the rear of the cartridge, and set them aside.
Gently lift up the half of the cartridge facing up, and set it aside.
Gently lift out the PCB, and clean the pins with isopropyl alcohol and a cotton swab. if the pins still remain dirty, carefully sand the pins with a very fine-grit sandpaper.
con 3 altri collaboratori
Membro da: 03/24/22
109 Reputazione
1 Guida realizzata
Distintivi: 0
Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito/forum.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 22
Ultimi 30 Giorni: 82
Tutti i Tempi: 1,087