Salta al contenuto principale

Cosa ti serve

Panoramica Video

Questo smontaggio non è una guida di riparazione. Per riparare il tuo PlayStation VR, usa il nostro manuale di assistenza.

  1. Smontaggio PlayStation VR, Smontaggio PlayStation VR: passo 1, immagine 1 di 1
    • Sulla carta, PlayStation VR si erge accanto ai suoi due concorrenti basati su PC, Oculus Rift e HTC Vive. Ecco le specifiche che ci interessano di più:

    • Singolo display AMOLED da 5,7 pollici con risoluzione 1920 × 1080 (960 × 1080 per occhio)

    • Campo visivo di circa 100º

    • Frequenza di aggiornamento fino a 120 Hz

    • Sistema di misurazione inerziale a sei assi (giroscopio a tre assi, accelerometro a tre assi)

    • Peso della cuffia: 610 g

  2. Smontaggio PlayStation VR: passo 2, immagine 1 di 3 Smontaggio PlayStation VR: passo 2, immagine 2 di 3 Smontaggio PlayStation VR: passo 2, immagine 3 di 3
    • La PlayStation VR si differenzia dai suoi concorrenti per la sua fascia per la testa e la visiera sospesa, piuttosto che per la configurazione degli occhiali (precedentemente standard).

    • Ciò significa molti meno segni della "faccia da Oculus."

    • La PS VR standard viene venduta con visore, unità processore mini-PS4, cuffie e diversi cavi numerati per collegare il tutto.

    • Venduti separatamente (o inclusi nell'edizione bundle) sono la fotocamera (molto necessaria) e le levette PlayStation Move (opzionali).

    • I controller Move sono testati e veritieri e abbiamo uno smontaggio vecchio di anni ma ancora scattante per soddisfare la tua curiosità.

    The Playstation move controllers are NOT the same as the once presented on the hyperlink.

    in research about a NULL meting of the Magnetometer and lack of information on the net about this I opened the controller up to take a look at the chip layout and such.

    What I found where a ton of changes in PCB layout and chip changes.

    Magnetometer still nowhere to be found, resulting in a over expensive disappointment as the sensor was needed for proper alignment readouts for the steamVR using psmove services

    Tekno Catron - Replica

  3. Smontaggio PlayStation VR: passo 3, immagine 1 di 3 Smontaggio PlayStation VR: passo 3, immagine 2 di 3 Smontaggio PlayStation VR: passo 3, immagine 3 di 3
    • È ora di dare un'occhiata agli esterni prima di aprire il PS VR.

    • Privo della build "agganciala alla tua faccia", PS VR ha una fascia scorrevole (non diversamente da Oculus CV1) con una ruota per il serraggio fine per garantire una perfetta aderenza.

    • L'esclusivo design della visiera sospesa di Sony presenta una soluzione completamente nuova al problema della regolazione dell'estrazione pupillare. Tieni semplicemente premuto il pulsante (sopra i simpatici simboli dei pulsanti PlayStation) e fai scorrere il "mirino" in avanti o indietro per cambiare la messa a fuoco.

    • Questo è molto più semplice del complesso treno di ingranaggi del Vive, ma non così indolore come spingere il Rift verso l'alto o il basso sul viso (grazie alle sue lenti Fresnel asimmetriche).

    • Gli obiettivi PS VR sono in realtà totalmente convenzionali, nessun obiettivo Fresnel (Vive) o hybrid fresnel (Rift CV1) qui.

  4. Smontaggio PlayStation VR: passo 4, immagine 1 di 3 Smontaggio PlayStation VR: passo 4, immagine 2 di 3 Smontaggio PlayStation VR: passo 4, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    iFixit Opening Picks (Set of 6)
    $4.99
    Compra
    • L'obiettivo si appoggia su una maschera di gomma, piuttosto che su una schiuma per occhiali e una vestibilità aderente, per bloccare la luce. Come bonus, è probabilmente più lavabile della schiuma.

    • Dopo aver rimosso lo scudo in gomma sostituibile dall'utente, ci vengono offerte delle semplici viti JIS (le cugine dalla testa aguzza delle Phillips) che tengono insieme il mirino.

    • Facciamo leva allegramente sul futuristico rivestimento in plastica (e sui diffusori LED) con il nostro fidato plettro di apertura.

    • E facendo capolino appena dietro, abbiamo trovato il primo dei 9 LED di rilevamento della posizione. Presto.

  5. Smontaggio PlayStation VR: passo 5, immagine 1 di 3 Smontaggio PlayStation VR: passo 5, immagine 2 di 3 Smontaggio PlayStation VR: passo 5, immagine 3 di 3
    • Rimossi i pezzi di rifinitura, siamo in grado di staccare il pannello frontale dell'unità visore per rivelare un mare di cavi flessibili e componenti.

    • Togliendo il pannello superiore si scopre la guida metallica su cui scorre l'unità visore durante la regolazione dell'estrazione pupillare.

    • A differenza di Rift e Vive, che si basano su una luce IR invisibile per il rilevamento della posizione, PS VR utilizza LED a luce visibile, in quell'iconico blu PlayStation.

    • Stacchiamo il primo di questi LED, ma non possiamo ancora separarli: fanno parte di un gruppo più ampio, contenente tutte e 7 le luci del visore.

  6. Smontaggio PlayStation VR: passo 6, immagine 1 di 2 Smontaggio PlayStation VR: passo 6, immagine 2 di 2
    • Dopo aver liberato il primo bit, conquistiamo l'oro ed eliminiamo l'intero cavo insettiforme dell'insieme dei LED.

    • Sfruttando la loro tecnologia esistente, Sony ha scelto di utilizzare i LED a luce visibile e la telecamera PlayStation Eye per il rilevamento della posizione.

    • L'uso della luce visibile significa che la PS VR avrà più difficoltà a competere con la luce ambientale nella stanza, forse perché Sony ha raddoppiato la maggior parte dei LED, aumentando le dimensioni e la luminosità di ciascuna luce sul visore.

    • Questo sistema è molto simile al Rift CV1, con uno schema di luce sul visore scansionato da un ricevitore fisso. Il Vive, invece, utilizza ricevitori IR sul visore, leggendo da una coppia di emettitori fissi.

    • Notiamo anche la relativa scarsità di LED (15 in totale) rispetto agli oltre 40 che compongono l'array LED IR del Rift.

    • Ricordi quel pulsante di regolazione del campo di pochi passaggi fa? Ecco la regolazione consentita: da vicino e personale! Oooh, elastico.

    • L'estrazione oculare è la distanza tra l'occhio e il piano del display. Un ampio intervallo di regolazione significa che gli utenti possono inserire facilmente gli occhiali sotto le cuffie.

    • Questo potrebbe non essere un adeguamento semplice come il CV1, ma dovrebbe essere più comodo per più utenti.

  7. Smontaggio PlayStation VR: passo 8, immagine 1 di 2 Smontaggio PlayStation VR: passo 8, immagine 2 di 2
    • Rimangono due cavi prima di poter separare la parte del piattino della fascia.

    • Questo connettore ampio e rinforzato ci fa pensare cavo display e non abbiamo sbagliato di molto, poiché questo è per l'ingresso HDMI e un connettore AUX.

    • Denominato collettivamente come il cavo del visore VR, questo minuscolo pacchetto è una delle migliori soluzioni di gestione dei cavi che abbiamo visto in VR.

    • Il secondo cavo, un minuscolo lavoro a 4 pin, alimenta i LED rimanenti, situati sul retro della fascia.

    How can I replace my headset cable as my rabbit cut it?

    where can I buy it?

    thank you

    damien

    smadhouse - Replica

    I have the same problem, if you find this cable, can you tell me how did you do it ?

    Valentin PLAUX - Replica

    i need this Cable (5)

    leni130386 - Replica

    could someone please let me know where i could find this cable.

    bailey.white1211 - Replica

    Man bummer no response, I also need this cable!

    loren smitley - Replica

    I cant believe they dont have a replacement cable.

    I have VR headsets right now. 1 with a chewed cable (which is new) and another with scratched screen and broken head band… I am attempting to swap the cables, and have the cable removed from the display and the rear of the head band. What I cant figure out how to do is get the cable out of the portion of the front of the headband where the sliding mechanism is. How can I disassemble the front of the headband?

    Michael - Replica

    Has Anyone Found a Replacement Cable ?

    ronald - Replica

  8. Smontaggio PlayStation VR: passo 9, immagine 1 di 3 Smontaggio PlayStation VR: passo 9, immagine 2 di 3 Smontaggio PlayStation VR: passo 9, immagine 3 di 3
    • Nascosta leggermente tra le lenti troviamo dell'elettronica nascosta.

    • Da un lato, un circuito integrato solitario: Bosch BMI055 IMU

    • Sul retro, quello che sembra un telemetro a infrarossi, composto da un emettitore e un ricevitore.

    • Questo dovrebbe dire alla PS VR se è sulla tua faccia o meno. Potrebbe anche essere in grado di dire quando stai per indossarla.

    The device marked in red is the Inertial Measurement Unit (IMU) BMI055 from Bosch Sensortec.

    Frederik Wegelin - Replica

    Thanks—good find! We've updated the teardown.

    Jeff Suovanen - Replica

    I thought that the range finder IC is an APDS-9960 by Avago-Technologies. But I tried it out and it didn’t work. Maybe someone else has an idea what it could be.

    Pelle Tuulison - Replica

  9. Smontaggio PlayStation VR: passo 10, immagine 1 di 3 Smontaggio PlayStation VR: passo 10, immagine 2 di 3 Smontaggio PlayStation VR: passo 10, immagine 3 di 3
    • La scheda madre è libera dal visore! Ecco cosa abbiamo trovato:

    • Ponte interfaccia HDMI Toshiba TC358870XBG

    • Microcontrollore serie ARM Cortex-M0 Nuvoton NUC123SD4SN3 NUC123

    • Driver LED RGB ROHM BD2802 (x3)

    • Wolfson WM1801G (probabilmente un codec audio, come si trova nel controller DualShock 4)

    • Cambio di livello HDMI 3.0 Gbps Parade Technologies PS8203

    • Texas Instruments S1L 621 APGH (probabilmente un modulo di alimentazione per il display AMOLED)

    • Memoria EEPROM seriale da 16 Kb Rohm BR24T16-W

    I think, S1L 621 APGH would be TI TPS65632 Triple-Output AMOLED Display Power Supply. check this out. http://www.ti.com/lit/ds/symlink/tps6563...

    doyoung42 - Replica

    In my opinion the name of the cable connector is also quite important. This 40 pin metal connector is a Hirose DF81 connector.

    Pelle Tuulison - Replica

  10. Smontaggio PlayStation VR: passo 11, immagine 1 di 3 Smontaggio PlayStation VR: passo 11, immagine 2 di 3 Smontaggio PlayStation VR: passo 11, immagine 3 di 3
    • Quella che pensavamo potesse essere una minuscola griglia dell'altoparlante è in realtà per un microfono considerevole montato sotto la visiera.

    • Forse PS VR ti consiglia di fare una pausa se inizi a respirare troppo forte?

    • Il display singolo è montato sul gruppo obiettivo con poche viti e due clip, rapidamente sganciato da uno spudger.

  11. Smontaggio PlayStation VR: passo 12, immagine 1 di 2 Smontaggio PlayStation VR: passo 12, immagine 2 di 2
    • Con il display AMOLED prodotto da Samsung liberato, lo buttiamo sul tavolo per uno sguardo più da vicino.

    • Mentre il Rift e il Vive utilizzano due display separati e alcuni complessi meccanismi di regolazione dell'IPD (distanza interpupillare), Sony ha scelto di semplificare tutto con un unico display e un IPD digitale.

    • Ciò significa che il software riposiziona l'immagine su ciascuna metà del display. Perderai alcuni pixel aumentando la distanza, ma si spera che lo snellimento del design valga il sacrificio.

    Does the screen have a anti reflective coating like a matte monitor has which could be causing a film grain effect

    markblox - Replica

    Sony should mass produce their own AMOLEDs, their AMOLED technology is far superior to Samsung's.

    Shamoy Rahman - Replica

    Is it possible change the display to a 4k display? Or i need a diferent Motherboard for 4k?

    berserker084 - Replica

    I have the same question. I looked around but couldn’t find any info on this.

    Jack Luo -

    Why so butthurt about Sony adopting Samsung's OLED? After all, Samsung is the best OLED manufacturer(Small-Medium size). If Sony had a better tech, they would have manufactured those panels by themselves.

    Young - Replica

    Sorry to be so late to the game, but where on this earth can you purchase a new display? Major hassle!

    lordrussell - Replica

  12. Smontaggio PlayStation VR: passo 13, immagine 1 di 3 Smontaggio PlayStation VR: passo 13, immagine 2 di 3 Smontaggio PlayStation VR: passo 13, immagine 3 di 3
    • Sony ha pubblicizzato la matrice subpixel in questo display, quindi abbiamo deciso di tirare fuori il nostro microscopio e dare un'occhiata più da vicino.

    • Sulla sinistra abbiamo un tradizionale display IPS retroilluminato a LED di un iPhone 6s.

    • E sulla destra c'è il display AMOLED di PS VR con una matrice esagonale di subpixel, coerente con altri display OLED Samsung che si trovano nei loro smartphone di punta.

    • E poiché sappiamo che non puoi vedere quei subpixel, abbiamo incluso una vista ingrandita del pannello OLED. Anche se c'è solo un aumento del 18% della densità dei pixel, i pixel sul display del visore sembrano minuscoli a causa della sua esclusiva matrice di subpixel.

    Maybe need display something, can show RGB color ?

    aya0091 - Replica

    The white circular mask seen in that photo is the blurring cover supposed to hide the screen door effect, the pixels itself are behind it. Pixels can be seen as very subtle darker lines in the less magnified photo. Thats what i think.

    Brokator - Replica

  13. Smontaggio PlayStation VR: passo 14, immagine 1 di 3 Smontaggio PlayStation VR: passo 14, immagine 2 di 3 Smontaggio PlayStation VR: passo 14, immagine 3 di 3
    • Una guarnizione in gomma morbida fa da cuscinetto per il display contro il gruppo obiettivo e tiene fuori la polvere dalla camera ottica della camera bianca.

    • Le lenti sono incollate nella loro montatura, ma con un po' di incoraggiamento (ad esempio un po' di calore e una buona spinta) saltano fuori.

    • Si tratta di lenti convenzionali spesse 14 mm, senza gradini di Fresnel e una forma a cupola liscia. Ciò significa che le lenti sono un po' più spesse delle lenti Fresnel nel Vive e le lenti ibride Fresnel del Rift.

    • Mentre Oculus e HTC hanno scelto di ridurre il peso con lenti più sottili, queste lenti dovrebbero disperdere meno luce dal display e fornire un'immagine più coesa rispetto alle ottiche di Vive o Rift. Le lenti di Fresnel tendono a creare discontinuità ottiche tra i loro gradini che possono suddividere l'immagine in pezzi.

  14. Smontaggio PlayStation VR: passo 15, immagine 1 di 3 Smontaggio PlayStation VR: passo 15, immagine 2 di 3 Smontaggio PlayStation VR: passo 15, immagine 3 di 3
    • È ora di affrontare quella fascia!

    • Per prima cosa, tiriamo fuori i morbidi cuscini della fascia. Niente colla o viti qui, quindi non preoccupatevi, amici sudati. Le prospettive di cambio di cuscini in futuro sembrano buone.

    • Abbiamo dei graziosi contrappesi su entrambi i lati della manopola di regolazione per spostare il display e la massa dell'obiettivo. Ci sono solo una piccola quantità di colla e alcuni ganci a tenerli in posizione, quindi sono facilmente estraibili.

    • Poiché questi pesi sono puramente per l'equilibrio, estraiamoli e "poi" confrontiamo i grandi tre, per vedere chi "potrebbe" realizzare l'auricolare più leggero. La rimozione dei loro 95 g porta il PS VR a circa 515 g. Questo lo colloca tra i 563 g del Vive e i 470 g del Rift.

    Bonjour,est il possible d’acheter le bandeau arrière ? Le mien est en mauvais état et je ne trouve pas de pièces de rechanges sur internet…

    Antho - Replica

  15. Smontaggio PlayStation VR: passo 16, immagine 1 di 3 Smontaggio PlayStation VR: passo 16, immagine 2 di 3 Smontaggio PlayStation VR: passo 16, immagine 3 di 3
    • Ultima fuori dalla fascia, la coppia di luci di "back up".

    • Questi sono i due gruppi LED che consentono al sistema di rilevamento della posizione di tenerti d'occhio quando ti guardi alle spalle, mantenendo viva la sensazione del mondo.

    • I gruppi sono anche convenientemente contrassegnati destra e sinistra. Le etichette rallegrano il cuore di un riparatore.

    • Con un po' meno spazio libero nella fascia rispetto alla sezione della visiera, questi LED illuminano il bordo di una guida di luce prima di passare attraverso il diffusore.

  16. Smontaggio PlayStation VR: passo 17, immagine 1 di 3 Smontaggio PlayStation VR: passo 17, immagine 2 di 3 Smontaggio PlayStation VR: passo 17, immagine 3 di 3
    • Prima di abbandonare la fascia, apriamo il suo meccanismo di regolazione.

    • Un gruppo pignone a molla ruota contro due cremagliere che si allargano o si contraggono, stringendo o allentando la fascia.

    • Un meccanismo di blocco integrato nel gruppo ingranaggi impedisce che la regolazione del cinturino scivoli mentre muovi la testa nel tuo mondo.

    This picture is wrong! The black clutch gear should have the wider portion toward the black headset band. If you put the pinion gear assembly together this way, the headband will only tighten and won’t loosen because the button won’t be able to separate the black and white gears.

    Laura Treider - Replica

  17. Smontaggio PlayStation VR: passo 18, immagine 1 di 3 Smontaggio PlayStation VR: passo 18, immagine 2 di 3 Smontaggio PlayStation VR: passo 18, immagine 3 di 3
    • Passiamo dal visore alla PlayStation in miniatura che Sony ha gentilmente incluso con PS VR senza costi aggiuntivi.

    • ...e i nostri redattori ci hanno appena informato che questa "sembra" solo una minuscola PlayStation, ed è in realtà un'unità processore, progettata per andare tra la PS4 che hai già e il tuo nuovo visore VR splendente.

    • È dotata di tre porte HDMI (una per PS4 per inviare video all'unità e due per inviare video alla TV e al visore), una porta USB, una presa AUX proprietaria e un jack cilindrico per l'alimentazione CC.

    • La apriamo e scopriamo che gli interni sono racchiusi in metallo. Non aiuta il fatto che questa non sia in realtà una PlayStation in miniatura, ragazzi.

    • Mentre siamo qui, ci imbattiamo in una simpatica piccola ventola brushless! Sicuramente sta succedendo qualcosa di caldo qui.

    Would the ASB0305MA-CF00 fan be swappable for an evercool EC3010M05CA or other 30mm x 30mm x 10mm 3 pole 5volt fan. Noise produce by my fan is terrible (think bearings are bad).

    Iain Cleary - Replica

    Did you ever find out if it would work? Mine has started making a very noisy buzzing sound and I would like to just replace the fan. Thanks

    John Frank -

    Someone peeled the label looking for screws on that second picture, next to the thumb ;)

    infiniti25 - Replica

    When rebuilding, the four silver screws fill the four slots on the same side as the fan, the other two screw holes are for the screws that enter from outside the plastics.

    infiniti25 - Replica

  18. Smontaggio PlayStation VR: passo 19, immagine 1 di 2 Smontaggio PlayStation VR: passo 19, immagine 2 di 2
    • Tiriamo fuori la scheda dalla scatola e sbucciamo un robusto dissipatore di calore in alluminio dal lato processore delle cose.

    • Secondo Sony, questa scatola non contiene alcuna elaborazione grafica. Gestisce invece l'elaborazione audio 3D di PS VR e può dirigere simultaneamente il video alla TV e alle cuffie.

    • Non vediamo l'ora di vedere cosa alimenta questo cucciolo.

  19. Smontaggio PlayStation VR: passo 20, immagine 1 di 2 Smontaggio PlayStation VR: passo 20, immagine 2 di 2
    • Cosa c'è dentro la scatola?

    • SoC Marvell DE3214-B0 Armada 1500 Pro 4K

    • SDRAM DDR3 Samsung K4B2G1646Q-BCMA da 256 MB (4 chip per 1 GB totale)

    • Ricetrasmettitore a punto incrociato ADV7626 HDMI 2:2 (x2 )

    • Sul rovescio:

    • SSD eMMC flash Samsung KLM4G1FE3A-F001 da 4 GB

    • Marvell 88E8087-NMN2 (probabilmente un Redriver USB)

    • Gestione energetica Marvell

    Typo on Marvell 88E8080-NMN2. but I can't find any infomation about 88E8080-NMN2.

    doyoung42 - Replica

    Where is the accelerometer/gyroscope chip? It should have one.

    whosnick - Replica

    What do you plan to do with it? Learn if somebody moves the processing box?

    kai -

    IMU is the BMI055

    Rylie Pavlik -

    A 4K processor?

    Daniel R - Replica

    My understanding is that the Armada 1500 4k pro includes a multi-core GPU. Hmmm?

    Daniel R - Replica

    Where can i buy a new processor

    Pedro banda - Replica

    Does anyone have a part number for the barrel jack on this board?

    Heath - Replica

  20. Smontaggio PlayStation VR: passo 21, immagine 1 di 2 Smontaggio PlayStation VR: passo 21, immagine 2 di 2
    • Ecco come si sbriciola il biscotto virtuale!

    • Come pasto principale offriamo un visore PS VR decostruito

    • E per dessert: un'unità processore PS VR!

  21. Considerazioni Finali
    • Costruito con cura e abbastanza semplice da smontare.
    • Molti pezzi, come i cuscini e lo scudo luminoso, si incastrano in posizione senza fissaggi o adesivi pignoli.
    • Le viti JIS J0 standard sono utilizzate ovunque. Puoi smontarlo con un singolo cacciavite che è probabilmente già nel tuo kit di strumenti elettronici (i cacciaviti a croce Philips funzionano per JIS se necessario).
    • L'adesivo non è troppo resistente, è usato con parsimonia e per lo più facile da rimuovere. Tuttavia, le lenti sono saldamente incollate in posizione.
    • Hardware con molti complicati pezzi di rifinitura extra che difficili da rimontare senza guide.
    Punteggio Riparabilità
    8
    Riparabilità 8 su 10
    (10 è il più facile da riparare)

Un ringraziamento speciale a questi traduttori:

en it

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Scott Havard

Membro da: 06/27/16

49.564 Reputazione

31 Guide realizzate

51 Commenti

Today i watched austin evans's unboxin video after few mins i sow the email received the teardown guid. impressive! Thank you ifixit team!

Buddhika Mahesh - Replica

@buddhika Lol...

I used to Watch His Videos...

Lol...

😆😅...

Pmsl...

Lol....

Yeh don't worry bout My Username...

Lol.

NONAREXAVITNA -

Is the PlayStation vr power adapter a dual voltage

dejiademola - Replica

It will work just fine, it supports dual voltage.

Shamoy Rahman -

Yes it supports dual voltage, enjoy

Shamoy Rahman -

Yes it supports dual voltage.

Shamoy Rahman - Replica

Awesome work! Without damaging, would it be possible to space the lenses out farther apart? My eyes are wider than average and I find the view pretty blurry because I'm looking through the edges of both lenses.

brandonros - Replica

I to am looking for a way to separate the lenses more for my wider IPD. Would it be possible to make or order additional lens and or adaptor (or glasses) to help with this problem?

Josh -

There are settings for the distance between eyes,..

V1 Mckannon -

I'm in desperate need of the VR headset cable as my rabbit broke it. Does anybody know where to order it?

daanfacebook - Replica

my Maltese dog chewed lightly in the cable by the volume control and power button. I freaked out when it no longer worked and in my rage tossed and stomped on the headset. needless to say I am in the market for a new VR headset now. Really wish this cable was replaceable and not built into the unit.

pilotlangdon -

My bestie chewed it and I am looking for some cable to replace it. Did you find any?

Natalia Morgado -

My cat chewed it and my headset is latest model CUH-ZVR2. Do you guys found any place where we can order replacement cable?

Rahul Hingonekar -

Sony has said that the Processor Unit will transfer 4K video to the TV when not being used for VR but not HDR.

I was hoping this would be fixed via firmware, given the emphasis that Sony made of HDR when announcing the PS4 Pro.

Now I see that the issue is probably due to the use of the ADV7626 part, which, if I'm correct, is disappointing.

I also noticed on the ADV's Datasheet that it can only handle 4K at 30hz.

Are you able to determine if this means that 4K video would not only not be able to handle HDR but also would have to restrict any video to 30 fps?

facebook - Replica

PS4 classic has HDMI 1.4 OUT only (no HDR in 4k and 4k 30hz only). The additional box is not magic powered :).

hydzior -

What's the sony vr processor unit voltage?

110-240?

Jason Choi - Replica

Yes,it supports dual voltage.

vere -

No accelerometer/gyroscope chip?

whosnick - Replica

One of the rubber bands that stretches when extending has popped out of the slot on my PSVR, can see it on Step 15 but its impossible to slot it back in the thin slot where it goes as the rubber piece is way thicker. Please help

grant christie - Replica

The microphone is actually incorporated into gaming. For example, during the smoking scene of the London Heist, you inhale from the cigar and the PSVR 'listens' when you exhales.

Daniel R - Replica

Will i be able to buy new lenses? because mine are already scratched,.. if so please make an easy replacement tutorial XD

V1 Mckannon - Replica

And now Xiaomi's come out with a VR headset that looks just like this but has more bells and whistles like 9-axis not 6-axis inertial motion sensors. And it only costs 200. Oops sorry I meant 200RMB which translates to about $40. This slow clap is for you Sony.

FixerUpper - Replica

Yeah... just buy a phone to power it all. That shell of a VR headset is garbage compared to the main three.

rain1dog -

What size is the barrel jack for DC power, if i wanted to buy an extra (3rd party)?

Morten Jensen - Replica

Please, someone, I really would like an extra power cord...

Morten Jensen -

I have been in contact with Sony, and they do not sell the power chord separately, neither do they want to inform me what the cable is called (what size the AUX socket and the barrel jack for DC power is). I then asked them what i was suppose to do if i accidentally lost my power chord, but they didn't reply.

Then i asked if my only option (if i lost my power chord) was to buy a whole new VR headset just to get one single cord.

They still haven't replied.

So, please, can someone tell me what the cable specs are?

Regards

Morten Jensen -

Hey guys, we need the lens parameters of the device, we already have inter lenses distance and baseline distance but we're missing scren distance to lenses. Could someone be so kind to measeure these if has an open unit?

Agustin Gimenez - Replica

Not even 20 minutes of life my VR had. If I could have only seen what's under me as I played I would have kicked my cat across the room and hoped I killed it before he chewed right through the #5 wire. At least I would have saved my VR. Easily was trying to play the worlds demo and before it even finished my display went dead. Thanks cat. I need a whole new replacement.

Dineen - Replica

Software that reads the HID feature reports returned by the new PS Move controllers now reports 0,0,0 for magnetometer data. Can anyone confirm that the new PS Move controllers have magnetometers?

Chad B - Replica

Hey my daughter thru one my processors for psvr in my pond in back yard I need another don't said they can't just sell one it comes with a set how do I get a another one

arfhan_ali - Replica

I need one of those too

Greg -

Is there any way I can get a processor? I bought the headset from a yard sale and can't find a processor anywhere.

William - Replica

Is the PlayStation vr lens paired to the processor unit? I mean if you connect the VR lens to another processor unit it won't work?

Jose Luis Fernandez -

Can you tell what material the lenses are made from? Glass or plastic, and if plastic what kind?

Alan Matthews - Replica

Hi:

On the reverse side the Marvell 88E8087-NMN2 is Marvell 88E8080-NMN2.

chunnan.lin - Replica

I like to use PSVR as a Video goggle and connect directly to any HDMI source. like FPV Dorn, Blu-ray etc. But the problem is x-usb error. I have to connect the usb connection to a PC or PS4. Is there any way to disable the USB connection? or By passing it ?

Thanks

Babak Sepahyar - Replica

Where can I buy PS VR Lenses? My lenses scratched without way to fix it

Nik - Replica

Where to buy parts?

Jex Belt - Replica

Hello

whilst I was using the headset I stood on the cable and the headset stopped working. I thought that the cable may have been dislodged in the headset but it seems ok. Is it possible to open the power and volume block to look at these connections?

thanks

simon

pybu - Replica

Does anyone have any idea what the specs are on the 3.15A SMD fuse are? Under a magnifying glass I was able to see it has a UD designation, but from what I can tell that just signifies 3.15A. How would I go about tracking down a replacement fuse?

Jonathan Felchlin - Replica

Hi. How do you tear down the new unit? I can’t find it anywhere. Can you do a diagram or video for it. Thanks.

Alex Flint - Replica

This misses the portion I was looking for - how to replace the cable chewed by a dog?

Pavel Petukhov - Replica

Need the head unit cable were can i get one?

rich-69 - Replica

Hi there. Unfourtunatelly my dog ate the cable. Do you have any picture of connection diagram. There are 4 Black cables and I dont know how to connect it. Many thanks in advance.

Dawid - Replica

Is the PlayStation vr lens paired to the processor unit? I mean if you connect the VR lens to another processor unit it will ?

Jose Luis Fernandez - Replica

Where I can find the foam from PSVR goggles?

ebrana - Replica

Can you replace the cable that goes into the extension cable?

Áron Kovács - Replica

As I was tearing mine down i found two screws underneath the white plastic trim on the top. Not knowing and thinking it was just adhesive, I damaged my psvr.

Logan Mann - Replica

Where do you buy replacement parts for psvr?

Andrew Fox - Replica

how do i take off the top headrest?

Brayden Bishop - Replica

This tear-down omitted 2 parts that are most likely to need replacement: forehead cushion and the main cable from headset to processing unit. Please take into consideration when doing future VR headset tear-downs.

tapyourfeet - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 81

Ultimi 30 Giorni: 380

Tutti i Tempi: 115,530