Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Strumenti necessari in questo Smontaggio

Introduzione

Its for my stem class and teardown and reassemble a playstation 2 controller

Questo smontaggio non è una guida di riparazione. Per riparare il tuo DualShock 2, usa il nostro manuale di assistenza.

  1. I had to remove all the screws on the back to get the controller open to see the inside or tear it down I had to remove all the screws on the back to get the controller open to see the inside or tear it down
    • I had to remove all the screws on the back to get the controller open to see the inside or tear it down

  2. so after i removed the back of the PS2 controller, this was the back inside of the controller and i had to remove one screw on the mother board
    • so after i removed the back of the PS2 controller, this was the back inside of the controller and i had to remove one screw on the mother board

  3. The last step was on the other side of the controllers backside, also the inside and this is where we removed the two sticks and had to put all the screws and pieces back together.
    • The last step was on the other side of the controllers backside, also the inside and this is where we removed the two sticks and had to put all the screws and pieces back together.

Georgie Patton

Membro da: 01/11/2016

197 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 57

Tutti i Tempi: 4,630