Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo PlayStation 2 Slimline, usa il nostro manuale di assistenza.

  1. PlayStation 2 Slimline Teardown/Disassembly, PlayStation 2 Slimline Teardown/Disassembly: passo 1, immagine 1 di 3 PlayStation 2 Slimline Teardown/Disassembly, PlayStation 2 Slimline Teardown/Disassembly: passo 1, immagine 2 di 3 PlayStation 2 Slimline Teardown/Disassembly, PlayStation 2 Slimline Teardown/Disassembly: passo 1, immagine 3 di 3
    • On a flat working surface, flip the PlayStation 2 Slimline so that the bottom side is facing up.

    • Remove the covers over the screws, circled in red on the second image.

    • Take a Phillip's #1 screwdriver and remove the five screws circled in red on the second image.

    • You will have to remove the "Do Not Void" seal in order to remove the last screw.

  2. PlayStation 2 Slimline Teardown/Disassembly: passo 2, immagine 1 di 2 PlayStation 2 Slimline Teardown/Disassembly: passo 2, immagine 2 di 2
    • Make sure you haven't forgotten the screw under the "Do Not Void" seal.

    • Take a metal spudger and separate the upper half of the chasis from the lower half.

    • For later models the DVD drive assembly is not screwed in and will fall off if you open it upside down.

  3. PlayStation 2 Slimline Teardown/Disassembly: passo 3, immagine 1 di 3 PlayStation 2 Slimline Teardown/Disassembly: passo 3, immagine 2 di 3 PlayStation 2 Slimline Teardown/Disassembly: passo 3, immagine 3 di 3
    • With the chassis open you can see the motherboard and its attachments.

    • Identify the battery, then use a spudger to pry it out. Disconnect the battery from the motherboard with your hands.

  4. PlayStation 2 Slimline Teardown/Disassembly: passo 4, immagine 1 di 3 PlayStation 2 Slimline Teardown/Disassembly: passo 4, immagine 2 di 3 PlayStation 2 Slimline Teardown/Disassembly: passo 4, immagine 3 di 3
    • Gently disconnect the three ribbon cables.

    • Take a Phillips #1 screwdriver and remove the four screws on the optical drive.

    • Two of the screws can't be seen on the picture, they are located on the opisite side from the visable ones.

    • Pull up the optical drive and carefully peel the flex cable, attached underneath the drive, from the metal plate.

  5. PlayStation 2 Slimline Teardown/Disassembly: passo 5, immagine 1 di 2 PlayStation 2 Slimline Teardown/Disassembly: passo 5, immagine 2 di 2
    • Remove the three PH00 screws from the fan's cover.

    • Then peel the duct tape back and remove the cable.

  6. PlayStation 2 Slimline Teardown/Disassembly: passo 6, immagine 1 di 3 PlayStation 2 Slimline Teardown/Disassembly: passo 6, immagine 2 di 3 PlayStation 2 Slimline Teardown/Disassembly: passo 6, immagine 3 di 3
    • Remove the four screws marked on the picture. These are located on the bottom side of the motherboard.

    • Then flip the motherboard back over and remove the two rating screws on the upside.

    • Now both metal plates should be ready to remove.

  7. PlayStation 2 Slimline Teardown/Disassembly: passo 7, immagine 1 di 2 PlayStation 2 Slimline Teardown/Disassembly: passo 7, immagine 2 di 2
    • Remove the metal plate from the bottom side of the motherboard.

    • Now everything should be disconnected and you successfully torn your PlayStation 2 Slimline down.

    • To reassemble, follow these steps in reverse.

tlroesner

Membro da: 05/13/12

1.864 Reputazione

4 Guide realizzate

2 Commenti

not all slimlines are internally the same. as seen in the second picture, this teardown is for the 75004 model

Roman - Replica

Komponen kotak hitam kaki 4 itu apa gan, di dalemnya kaya jumperan gitu. Itu fungsinya buat apa ya? Posisinya sudut kiri bawah iptikal drive.

camxmovie - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 19

Ultimi 7 Giorni: 181

Ultimi 30 Giorni: 776

Tutti i Tempi: 78,821