Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Disassembly to get to the sensor. Some images are courtesy of lifepixels.com

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Panasonic Camera, usa il nostro manuale di assistenza.

  1. I have dust particles underneath the sensor glass, so sensor swabs didn't  help me. I will try to get inside and under the glass. Additionally the EVF is overbright after a drop and maybe can be rearranged in the process. You can spot the dust best if you set the camera to the "A" mode at f/22 and take a picture of the sky You can spot the dust best if you set the camera to the "A" mode at f/22 and take a picture of the sky
    • I have dust particles underneath the sensor glass, so sensor swabs didn't help me. I will try to get inside and under the glass. Additionally the EVF is overbright after a drop and maybe can be rearranged in the process.

    • You can spot the dust best if you set the camera to the "A" mode at f/22 and take a picture of the sky

  2. Start with these two screws. Remember screw sizes and position, there are many different lengths used!
    • Start with these two screws. Remember screw sizes and position, there are many different lengths used!

  3. remove the flash spring as shown and the four screws remove the flash spring as shown and the four screws remove the flash spring as shown and the four screws
    • remove the flash spring as shown and the four screws

  4. Remove this screw
    • Remove this screw

  5. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  6. Insert wisdom here.
    • Insert wisdom here.

  7. remove the backplate and remove the ribbon cables remove the backplate and remove the ribbon cables
    • remove the backplate and remove the ribbon cables

  8. remove the 3 screws
    • remove the 3 screws

  9. to remove the sensor more easily you can remove the top bar before to remove the sensor more easily you can remove the top bar before to remove the sensor more easily you can remove the top bar before
    • to remove the sensor more easily you can remove the top bar before

  10. Flash E.Capacitor removal
    • Flash E.Capacitor removal

  11. Remove the 3 screws to get the sensor cover glass off. Be Careful not to let them fall inside the housing. There are extremely strong magnets! Remove the 3 screws to get the sensor cover glass off. Be Careful not to let them fall inside the housing. There are extremely strong magnets!
    • Remove the 3 screws to get the sensor cover glass off. Be Careful not to let them fall inside the housing. There are extremely strong magnets!

Andi

Membro da: 21/01/2017

191 Reputazione

1 Guida realizzata

Hello,

and what about Flange back adjustment? Did you solve it somehow?

Štěpán Karásek - Replica

Hi, what exactly do you mean? I managed to wipe the sensor clean, but correct reassembly is difficult. I might have missaligned the magnets holding the sensor and now the camera sometimes seems to focus very slow.

Andi -

How do you remove the top case unit or top bar?

Nigel - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 60

Tutti i Tempi: 2,215