Disassembling the remote requires removing screws under the batteries.Removing anything inside will require caution and time .
Questo smontaggio non è una guida di riparazione. Per riparare il tuo Nintendo Wii Remote, usa il nostro manuale di assistenza.
-
-
-
-
-
-
To fully take off the back piece you will have to use your flat head screw driver and gently go along the edge and unclip it.
-
Gently pull out the whole circuit board ( be careful you may break or rip a wire if you pull to hard )
-
{CAUTION :WATCH OUT FOR SMALL PARTS}
-
-
To remove the buttons you will simply have to take off the grey silicon cover.
-
To remove the small speaker you can simply pull up .
-
CAUTION : FOR SMALLER BUTTONS LIKE THE VOLUME ONES .
-
-
Gently pry the buttons upwards ,removing the buttons from its holding slot.
-
CAUTION : WATCH OUT FOR SMALL BUTTONS !
-
IF YOU WANT TO REBUILD IT FOLLOW STEPS 1-7 BACKWORDS.
Incorpora questa guida
Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito/forum.
Anteprima