Strumenti necessari in questo Smontaggio

Introduzione

New gigabit router simultaneous dual N-band from Netgear.

This product includes software code subject to the GPL or LGPL.

I'm hopeful for future OPEN-implementations.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Netgear WNDR3700, usa il nostro manuale di assistenza.

  1. Unpackage. Unpackage. Unpackage.
    • Unpackage.

  2. remove 4 caps. remove 6 screws. remove 6 screws.
    • remove 4 caps.

    • remove 6 screws.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. gently open the lid. uplift the board. this step is very easy!! uplift the board. this step is very easy!!
    • gently open the lid.

    • uplift the board. this step is very easy!!

  5. Remove the shield for microwaves circuit Remove the shield for microwaves circuit Remove the shield for microwaves circuit
    • Remove the shield for microwaves circuit

  6. We can see 8 stand-offs to keep the covers from pressing down on the actual circuits.
    • We can see 8 stand-offs to keep the covers from pressing down on the actual circuits.

    • Look to the left, outside the shielding and see 4 mini connectors, then follow those to the square pads on the PCB... These are the antennas.

anythingtoostup

Membro da: 12/01/2010

167 Reputazione

1 Guida realizzata

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 32

Tutti i Tempi: 33,751