Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Morphy Richards Iron, usa il nostro manuale di assistenza.

  1. Morphy Richards Iron Teardown, Morphy Richards Iron Teardown: passo 1, immagine 1 di 1
    • This is the iron we will take apart.

  2. Morphy Richards Iron Teardown: passo 2, immagine 1 di 1
    • First remove the rear or the iron using the flathead screwdriver.

  3. Morphy Richards Iron Teardown: passo 3, immagine 1 di 1
    • Next remove the cable bridge bracket.

  4. Morphy Richards Iron Teardown: passo 4, immagine 1 di 1
    • Next remove the screws from the base. (see arrows for location)

  5. Morphy Richards Iron Teardown: passo 5, immagine 1 di 1
    • Next remove the screw the hold the top on.

  6. Morphy Richards Iron Teardown: passo 6, immagine 1 di 1
    • To free the long cable remove from terminal block at rear.

  7. Morphy Richards Iron Teardown: passo 7, immagine 1 di 1
    • At the front of the iron pull out the buttons for the steam and water.

  8. Morphy Richards Iron Teardown: passo 8, immagine 1 di 1
    • Next unclip the button holder (red circle) by undoing the screws (black circle)

  9. Morphy Richards Iron Teardown: passo 9, immagine 1 di 1
    • Next remove the bridge clip from the arrows position.

  10. Morphy Richards Iron Teardown: passo 10, immagine 1 di 1
    • Next remove the inner button (black circle)

    • Now remove the centre screw (red arrow)

  11. Morphy Richards Iron Teardown: passo 11, immagine 1 di 1
    • slide off the cable holder from the cable.

  12. Morphy Richards Iron Teardown: passo 12, immagine 1 di 1
    • Disassemble the plug

    • First remove the casing.

    • Now remove the wires from the pins.

    • Next remove the pins.

  13. Morphy Richards Iron Teardown: passo 13, immagine 1 di 1
    • Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.

  14. Morphy Richards Iron Teardown: passo 14, immagine 1 di 1
    • Next take out round selector, this is simply clipped so can be pulled out with pliers.

  15. Morphy Richards Iron Teardown: passo 15, immagine 1 di 1
    • Next remove the washer parts at the front of the iron.

    • Take the tubing off.

  16. Morphy Richards Iron Teardown: passo 16, immagine 1 di 1
    • Remove the seals for the water pump.

    • Now take pumps out.

  17. Morphy Richards Iron Teardown: passo 17, immagine 1 di 1
    • Remove the screw (circled) this will lead to the separation of the base and the top.

  18. Morphy Richards Iron Teardown: passo 18, immagine 1 di 1
    • Remove the top of the iron to reveal the under parts.

    • Now remove the rubber seals from the plate.

    • Take out the screws linking to the stainless steel base.

  19. Morphy Richards Iron Teardown: passo 19, immagine 1 di 1
    • Remove the terminal block from the wires.

    • Next take off the black section of the iron.

  20. Morphy Richards Iron Teardown: passo 20, immagine 1 di 1
    • Now remove the screws from the steel base.

  21. Morphy Richards Iron Teardown: passo 21, immagine 1 di 1
    • Next remove each individual part ( mostly wiring)

  22. Morphy Richards Iron Teardown: passo 22, immagine 1 di 1
    • All parts at the end of the process.

RIchard fox

Membro da: 03/17/10

269 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 46

Ultimi 30 Giorni: 106

Tutti i Tempi: 32,508