Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Misfit Vapor, usa il nostro manuale di assistenza.

  1. Misfit Vapor Teardown, Back.: passo 1, immagine 1 di 3 Misfit Vapor Teardown, Back.: passo 1, immagine 2 di 3 Misfit Vapor Teardown, Back.: passo 1, immagine 3 di 3
    • In order to open this watch you will need a watch opening tool. Those are normally called "Jaxa" style. This is to secure the midframe while you pop up the back. This will require force as there is a rubber seal and the fit is tight.

  2. Misfit Vapor Teardown: passo 2, immagine 1 di 1
    • Remove the ribbons from the PCB marked in the photo

  3. Misfit Vapor Teardown: passo 3, immagine 1 di 2 Misfit Vapor Teardown: passo 3, immagine 2 di 2
    • Remove the screws that attach the pcb to the plastic mid frame. You can separate the midframe from the case and access all the components

  4. Misfit Vapor Teardown: passo 4, immagine 1 di 1
    • Screen and digitizer part numbers is marked as WB014ZNM-N00-6D00 MFPC R0.4

  5. Misfit Vapor Teardown: passo 5, immagine 1 di 2 Misfit Vapor Teardown: passo 5, immagine 2 di 2
    • Battery is an odd round battery made by Grepow. Part number is ABI403530 360Mah 3.8V . Closest match i can find is GRP4035030, probably with a custom made connector.

LazarusLong

Membro da: 12/08/19

292 Reputazione

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,526