Strumenti necessari in questo Smontaggio

Introduzione

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Mouse, usa il nostro manuale di assistenza.

  1. Rotate mouse over and locate Trackball cover
    • Rotate mouse over and locate Trackball cover

    • Using index fingers and thumb, rotate counter-clockwise

    Aggiungi Commento

  2. After the Trackball cover has been rotated, pry the lid off using fingernails.
    • After the Trackball cover has been rotated, pry the lid off using fingernails.

    • Remove Trackball cover and place to the side.

    • Angle mouse to eject Trackball from the casing.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

    • Lift the two cases apart and place screw to the side.

    Aggiungi Commento

    • Remove the wire from the plastic casing near the top of the mouse.

    • Lift up to remove the PCB which is attached to the mouse.

    • Place case to the side.

    Aggiungi Commento

    • Locate where the wire is connected to the PCB via the white connection.

    • Pry the connections apart and place the cable to the side.

    Aggiungi Commento

Kevin Gingrich

Membro da: 06/10/2011

172 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 20-28, Maness Fall 2011 Membro di Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Membri

7 Guide realizzate

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - Replica

Yes sir I won't know everything about the machine

mubarak wad gab tagel - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 28

Tutti i Tempi: 3,004