Salta al contenuto principale

Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Cosa ti serve

  1. Matrox TripleHead2Go Display Adapter Teardown, Matrox TripleHead2Go Display Adapter Teardown: passo 1, immagine 1 di 3 Matrox TripleHead2Go Display Adapter Teardown, Matrox TripleHead2Go Display Adapter Teardown: passo 1, immagine 2 di 3 Matrox TripleHead2Go Display Adapter Teardown, Matrox TripleHead2Go Display Adapter Teardown: passo 1, immagine 3 di 3
    • The first step is to unscrew all screws.

    • Second one is to insert something at the shown edge pull gently but firmly apart, alternating sides.

    • At the end, it will come off sideways.

    • It will be full of tiny copper pieces. Actually they won't be where you see them in the picture, but pulled off and laying around. You will need them to reassembly.

  2. Matrox TripleHead2Go Display Adapter Teardown, The card at daylight: passo 2, immagine 1 di 2 Matrox TripleHead2Go Display Adapter Teardown, The card at daylight: passo 2, immagine 2 di 2
    • This is how the card looks. Well made, isn't it?

    • If you turn it around, you will see on two chips the heat dissipating creme. Maybe you want to change it.

  3. Matrox TripleHead2Go Display Adapter Teardown, The other way round: passo 3, immagine 1 di 1
    • To reassemble the card, just go the same way back. You can see the positions of the copper pieces in the previous step (I guessed them by the marks in the metal), and the one of the screws in the first step. Easy, isn't it?

leon

Membro da: 09/28/11

133 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 183