Questo smontaggio è in corso – Ricarica periodicamente per vedere gli ultimi cambiamenti!

Strumenti necessari in questo Smontaggio

Introduzione

How to take apart the M6013 Capacitor Meter

  1. Remove the circled screw Remove battery case and batteries
    • Remove the circled screw

    • Remove battery case and batteries

  2. Remove circled screws Pull case apart Watch out for buttons, they will fall out easily.
    • Remove circled screws

    • Pull case apart

    • Watch out for buttons, they will fall out easily.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Remove circled screws Be careful when removing the circuit board, the battery cable is still connected. Unsolder the square locations either on the circuit board or the case to fully remove the circuit board
    • Remove circled screws

    • Be careful when removing the circuit board, the battery cable is still connected.

    • Unsolder the square locations either on the circuit board or the case to fully remove the circuit board

  5. Location of microprocessor Location of microprocessor
    • Location of microprocessor

  6. Remove the cable connector Remove Display
    • Remove the cable connector

    • Remove Display

Ted Hsueh

Membro da: 20/09/2012

170 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 16-56, Forte Fall 2012 Membro di Cal Poly, Team 16-56, Forte Fall 2012

CPSU-FORTE-F12S16G56

5 Membri

7 Guide realizzate

Add some specs on start and foto of the unit ....

Mateusz Bonkowski - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 352