Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

I will teach you how to dissemble this Router

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Linksys WRT54G, usa il nostro manuale di assistenza.

  1. The Linksys WRT54G series is a series of Wi-Fi gateways manufactured by Linksys, a subsidiary of Cisco Systems. The Linksys WRT54G series is a series of Wi-Fi gateways manufactured by Linksys, a subsidiary of Cisco Systems.
    • The Linksys WRT54G series is a series of Wi-Fi gateways manufactured by Linksys, a subsidiary of Cisco Systems.

  2. Let's begin with the teardown! First, unscrew the antennas from the back of the router and set them aside. Let's begin with the teardown! First, unscrew the antennas from the back of the router and set them aside.
    • Let's begin with the teardown! First, unscrew the antennas from the back of the router and set them aside.

  3. Lets get into the internals! First, flip the unit over and insert a small flat-head screwdriver in between the warranty sticker and the front panel and gently pry it open. Beware! It may take some effort to pry the panel off.  Also, be careful not to damage the motherboard, like I did. This will certainly void your warranty from 2002, in case you wanted to know.
    • Lets get into the internals! First, flip the unit over and insert a small flat-head screwdriver in between the warranty sticker and the front panel and gently pry it open.

    • Beware! It may take some effort to pry the panel off. Also, be careful not to damage the motherboard, like I did.

    • This will certainly void your warranty from 2002, in case you wanted to know.

  4. Now, slide the top plastic panel off and put it aside you now have a clear view of the motherboard. Intel TE28F320 Flash Memory Broadcom BCM4712KPB (I think it’s a modem chip)
    • Now, slide the top plastic panel off and put it aside you now have a clear view of the motherboard.

    • Intel TE28F320 Flash Memory

    • Broadcom BCM4712KPB (I think it’s a modem chip)

    • Admtek ADM6996L Ethernet Controller

    • Activity LEDs

    • Issi 42S16400-6T Random Access Memory (unsure how much)

    • An assortment of other chips I couldn't find.

  5. Time to remove the motherboard! Unscrew the single Phillips screw,  slide the motherboard and then lift it out. Single Phillips screw Plastic slips holding the motherboard in place.
    • Time to remove the motherboard! Unscrew the single Phillips screw, slide the motherboard and then lift it out.

    • Single Phillips screw

    • Plastic slips holding the motherboard in place.

  6. You're done! Thanks for sticking with me for my first teardown!
    • You're done! Thanks for sticking with me for my first teardown!

    • If you want to reassemble this, just do this guide in reverse order! (assuming you didn't break it like I did)

Reed Crosby

Membro da: 07/12/2016

4.295 Reputazione

1 Guida realizzata

Team

Kid fixers Membro di Kid fixers

Community

114 Membri

74 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 29

Ultimi 30 Giorni: 95

Tutti i Tempi: 4,383