Salta al contenuto principale

Strumenti necessari in questo Smontaggio

Introduzione

This will provide information on dissembling the phone to allow for repairs.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Kyocera Oystr, usa il nostro manuale di assistenza.

  1. Kyocera Oystr Teardown, Removing the battery: passo 1, immagine 1 di 3 Kyocera Oystr Teardown, Removing the battery: passo 1, immagine 2 di 3 Kyocera Oystr Teardown, Removing the battery: passo 1, immagine 3 di 3
    • Make sure the phone is turned off before disassembly.

    • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

    • Remove the battery from the casing. This is simply a precaution.

    • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

  2. Kyocera Oystr Teardown, Removing screws from screen: passo 2, immagine 1 di 3 Kyocera Oystr Teardown, Removing screws from screen: passo 2, immagine 2 di 3 Kyocera Oystr Teardown, Removing screws from screen: passo 2, immagine 3 di 3
    • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

    • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

  3. Kyocera Oystr Teardown, Exposing internal components: passo 3, immagine 1 di 3 Kyocera Oystr Teardown, Exposing internal components: passo 3, immagine 2 di 3 Kyocera Oystr Teardown, Exposing internal components: passo 3, immagine 3 di 3
    • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

    • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

  4. Kyocera Oystr Teardown, Removing metal cover: passo 4, immagine 1 di 1
    • Remove metal cover by lifting up and away from the device.

  5. Kyocera Oystr Teardown, Screen removal: passo 5, immagine 1 di 3 Kyocera Oystr Teardown, Screen removal: passo 5, immagine 2 di 3 Kyocera Oystr Teardown, Screen removal: passo 5, immagine 3 di 3
    • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

    • Use your fingernail to detach the ribbon connecting the board to the screen.

    • Remove the damaged screen from the device.

  6. Kyocera Oystr Teardown, Completing the repair: passo 6, immagine 1 di 1
    • Follow steps in reverse order to replace Kyocera Oystr’s screen.

David

Membro da: 04/10/2011

24 Reputazione

2 Guide realizzate

Team

UW Stout, Team 5-7, Zhou Fall 2011 Membro di UW Stout, Team 5-7, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G7

2 Membri

4 Guide realizzate

2 Commenti

where do I get a new screen?

LARS ANDERSEN - Replica

where do i get a new screen

thanks

LARS ANDERSEN - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 4,150