Strumenti necessari in questo Smontaggio

Introduzione

This will provide information on dissembling the phone to allow for repairs.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Kyocera Oystr, usa il nostro manuale di assistenza.

Make sure the phone is turned off before disassembly.
  • Make sure the phone is turned off before disassembly.

  • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

  • Remove the battery from the casing. This is simply a precaution.

  • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

Aggiungi Commento

Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.
  • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

  • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

Aggiungi Commento

  • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

  • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

Aggiungi Commento

  • Remove metal cover by lifting up and away from the device.

Aggiungi Commento

  • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

  • Use your fingernail to detach the ribbon connecting the board to the screen.

  • Remove the damaged screen from the device.

Aggiungi Commento

  • Follow steps in reverse order to replace Kyocera Oystr’s screen.

Aggiungi Commento

David

Membro da: 04/10/2011

24 Reputazione

2 Guide realizzate

Team

UW Stout, Team 5-7, Zhou Fall 2011 Membro di UW Stout, Team 5-7, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G7

2 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 3,669