Strumenti necessari in questo Smontaggio
Introduzione
I just went along, tearing it apart. Pictures are of what I found, along with some of the tools I used.
-
Removing tray and such.
-
Taking off the top.
-
Print heads coming out.
-
Ink coming out.
-
T10 bit; time to start unscrewing.
-
Finding screws.
I don't find helpful the pictures about finding the screws, step 6. Only the last foto shows a screw on the right wall of the bottom panel.
-
Finding more screws.
-
Finding hidden screws.
-
Finding more hidden screws; breaking off side-panel cover thingy.
-
The motherboard.
-
Finding more release mechanisms.
-
Off come more outer panels; some with more (brute) force than others.
-
Miscellaneous parts.
-
More parts/stuff coming out.
-
Getting deeper!
-
Various assemblies coming apart/out.
-
Found some T8 screws used for a controller board and the motor screws.
-
Motor out, and plastic guide slide thingy detached from one end.
-
Print head assembly/hoses coming out/apart.
-
More print head stuff.
-
More miscellaneous assemblies.
-
Another group of circuitry.
-
More mechanical parts.
-
More assemblies, and a pile of junk...
-
Leaked magenta, and as far as I went before calling the job "done enough".
