Salta al contenuto principale

HP 15-bs015dx Teardown

Panoramica Video

  1. HP 15-bs015dx Teardown, Remove the Battery - Part 1: passo 1, immagine 1 di 3 HP 15-bs015dx Teardown, Remove the Battery - Part 1: passo 1, immagine 2 di 3 HP 15-bs015dx Teardown, Remove the Battery - Part 1: passo 1, immagine 3 di 3
    • Put the laptop facing down

    • Move the left battery safe lock to the right

  2. HP 15-bs015dx Teardown, Remove the Battery - Part 2: passo 2, immagine 1 di 3 HP 15-bs015dx Teardown, Remove the Battery - Part 2: passo 2, immagine 2 di 3 HP 15-bs015dx Teardown, Remove the Battery - Part 2: passo 2, immagine 3 di 3
    • Slide the right battery safe lock to the left

    • This lock is harder than the previous, with this the battery should pop-up.

  3. HP 15-bs015dx Teardown, Remove the 6 visibles screws: passo 3, immagine 1 di 3 HP 15-bs015dx Teardown, Remove the 6 visibles screws: passo 3, immagine 2 di 3 HP 15-bs015dx Teardown, Remove the 6 visibles screws: passo 3, immagine 3 di 3
    • Use a Philips 0 screwdriver

  4. HP 15-bs015dx Teardown, Remove the 4 hidden screws: passo 4, immagine 1 di 3 HP 15-bs015dx Teardown, Remove the 4 hidden screws: passo 4, immagine 2 di 3 HP 15-bs015dx Teardown, Remove the 4 hidden screws: passo 4, immagine 3 di 3
    • Use a straw to take off just enough of the rubber feet of the 4 corners

    • Use a Phillips screwdriver 0

    • Replace each rubber foot in place after removing the screws

    • You will have a total of 10 screws

  5. HP 15-bs015dx Teardown, Remove the DVD unit: passo 5, immagine 1 di 2 HP 15-bs015dx Teardown, Remove the DVD unit: passo 5, immagine 2 di 2
    • It will go out easily with or without a straw

    • You can check the model number

  6. HP 15-bs015dx Teardown, Separate the pieces of the chassis part 1: passo 6, immagine 1 di 3 HP 15-bs015dx Teardown, Separate the pieces of the chassis part 1: passo 6, immagine 2 di 3 HP 15-bs015dx Teardown, Separate the pieces of the chassis part 1: passo 6, immagine 3 di 3
    • Flip the laptop and open it

    • Use a plastic tool or a straw to separate the pieces of the chassis

  7. HP 15-bs015dx Teardown, Separate the pieces of the chassis part 2: passo 7, immagine 1 di 3 HP 15-bs015dx Teardown, Separate the pieces of the chassis part 2: passo 7, immagine 2 di 3 HP 15-bs015dx Teardown, Separate the pieces of the chassis part 2: passo 7, immagine 3 di 3
    • Flip the laptop and separate the inferior cover of the chassis

    • Hard Drive 2.5" SATA

    • 2 RAM memory slots type DDR4 SO-DIMM

    • CPU Intel 7th generation

    • Active heat sink (fan)

    • Wireless card

    • Watch battery, 3V. CR2030

    Se puede sacar su procesador?

    johanluisos.com - Replica

    No. En este caso, el CPU es un core i5-7200u, el cual usa un zócalo tipo BGA, es decir, usa soldadura para pegarse a la placa base.

    Marcos Mora -

    Any info on how to swap out a non-backlit keyboard for a backlit keyboard for the 15-bs015DX? Thanks.

    David - Replica

    In this case, it looks like the whole plastic around the keyboard comes with it.

    I can't be sure, since I no longer have the laptop. Try to disassemble it and look if they sell a drop-in keyboard replacement

    Marcos Mora -

    What type of m.2 it support, and what type of m.2 socket it have. Thank you.

    Hocine Gasmi - Replica

    M.2 SATA-3. But I don't see a space to put on the m.2 screw. I recommend you open it up and double check.

    Marcos Mora -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 39 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

es en

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Marcos Mora

Membro da: 12/17/17

3.561 Reputazione

11 Guide realizzate

16 Commenti

Se me rompio las bisagras … como se reemplazan ?

Javier Horacio Monti - Replica

No tengo la laptop a mano para tomarle fotos, aunque en el paso 7 se puede ver algo. Depende de la rotura, lo típico que se rompe es la rosca para los tornillos, hay que crear un nueva rosca con material adicional, sin embargo, desconozco el procedimiento. En todo caso, puedes contactarme a mis RRSS que están en mi perfil de ifixit.

Marcos Mora -

Your step by step guide is apt. Thanks

Perebowei Titus Otoru Nigeria

Perebowei Titus Otoru - Replica

Buenas podrías hacer un tutorial desarmando y ensamblando la webcam

Javier - Replica

Saludos, ya entregué la laptop al cliente.

Marcos Mora -

Hola tengo una HP 15-bs038dx funciona un disco SSD M2 NVMe en ella o solo SATA? Muchas Gracias

Federico Barragán - Replica

Saludos, es difícil decirlo sin abrirla. La que tengo en fotos no tiene slot para m.2, por ejemplo.

Marcos Mora -

Hola y como se quita el teclado para limpiarlo, o es fijo ?

ayhdez - Replica

es fijo, pero puede limpiarlo con una brocha fina y pasarle una aspiradora

Luis Anniel -

Can I upgrade with SSD for this laptop?

Ram Krish - Replica

Yes! As long as it is a SATA 2.5" SSD

Marcos Mora -

Comprehensive explanation (especially for guitarists :-)))

Achim-Peter Gropius - Replica

Ou je peu trouvé la batterie

valeryjules33 - Replica

hi I have this laptop, and there was a power failure during a BIOS update, is there anything I can do to unbrick it?

Daniel Lopez - Replica

Hola Marcos muy buena tu guía.

Estoy trabado en el paso 6 porque  no se abrió totalmente.

Se levantan la parte del teclado pero en la parte superior queda como fijo pegado.

Tengo miedo forzar y romper lago,

Estoy en Argentina y la verdad no se que podría ser un pajuela. Probé con un elemento de plástico duro pero no puedo pasar de se paso y visualizar el interior d la laptop

Espero me puedas ayudar.

Gracias.

Gabriel

gabriel - Replica

como se llama la cinta que va del boton de encendido a la placa?

irving armenta - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 42

Ultimi 7 Giorni: 280

Ultimi 30 Giorni: 1,327

Tutti i Tempi: 81,293