Salta al contenuto principale

Introduzione

I teach you how to open the laptop to access and change the RAM, hard drive or whatever you need.

Panoramica Video

  1. Put the laptop facing down Move the left battery safe lock  to the right Move the left battery safe lock  to the right
    • Put the laptop facing down

    • Move the left battery safe lock to the right

  2. Slide the right battery safe lock to the left This lock is harder than the previous, with this the battery should pop-up. This lock is harder than the previous, with this the battery should pop-up.
    • Slide the right battery safe lock to the left

    • This lock is harder than the previous, with this the battery should pop-up.

  3. Use a Philips 0 screwdriver Use a Philips 0 screwdriver Use a Philips 0 screwdriver
    • Use a Philips 0 screwdriver

  4. Use a straw to take off just enough of the rubber feet of the 4 corners Use a Phillips screwdriver 0 Replace each rubber foot in place after removing the screws
    • Use a straw to take off just enough of the rubber feet of the 4 corners

    • Use a Phillips screwdriver 0

    • Replace each rubber foot in place after removing the screws

    • You will have a total of 10 screws

  5. It will go out easily with or without a straw You can check the model number
    • It will go out easily with or without a straw

    • You can check the model number

  6. Flip the laptop and open it Use a plastic tool or a straw to separate the pieces of the chassis Use a plastic tool or a straw to separate the pieces of the chassis
    • Flip the laptop and open it

    • Use a plastic tool or a straw to separate the pieces of the chassis

  7. Flip the laptop and separate the inferior cover of the chassis Hard Drive 2.5" SATA 2 RAM memory slots type DDR4 SO-DIMM
    • Flip the laptop and separate the inferior cover of the chassis

    • Hard Drive 2.5" SATA

    • 2 RAM memory slots type DDR4 SO-DIMM

    • CPU Intel 7th generation

    • Active heat sink (fan)

    • Wireless card

    • Watch battery, 3V. CR2030

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 19 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

es en

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Marcos Mora

Membro da: 17/12/2017

2.636 Reputazione

11 Guide realizzate

Se me rompio las bisagras … como se reemplazan ?

Javier Horacio Monti - Replica

No tengo la laptop a mano para tomarle fotos, aunque en el paso 7 se puede ver algo. Depende de la rotura, lo típico que se rompe es la rosca para los tornillos, hay que crear un nueva rosca con material adicional, sin embargo, desconozco el procedimiento. En todo caso, puedes contactarme a mis RRSS que están en mi perfil de ifixit.

Marcos Mora -

Your step by step guide is apt. Thanks

Perebowei Titus Otoru Nigeria

Perebowei Titus Otoru - Replica

Buenas podrías hacer un tutorial desarmando y ensamblando la webcam

Javier - Replica

Hola tengo una HP 15-bs038dx funciona un disco SSD M2 NVMe en ella o solo SATA? Muchas Gracias

Federico Barragán - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 52

Ultimi 7 Giorni: 437

Ultimi 30 Giorni: 1,958

Tutti i Tempi: 26,450