Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Fitbit Charge HR, usa il nostro manuale di assistenza.

  1. Fitbit Charge HR Teardown, Remove Screws: passo 1, immagine 1 di 1
    • Take the 4 Screws out of the Sides you will need a T3 star Screw Driver

  2. Fitbit Charge HR Teardown: passo 2, immagine 1 di 2 Fitbit Charge HR Teardown: passo 2, immagine 2 di 2
    • You Pry out the Main board you can see the Metal Hooks

  3. Fitbit Charge HR Teardown: passo 3, immagine 1 di 1
    • You can Then pull out the Screws from around the Screen

Bradley Nelson

Membro da: 03/08/16

56 Reputazione

1 Guida realizzata

8 Commenti

Can the battery be replaced?

Rick - Replica

Mine was just over a year old (barely out of warranty) when it died. The Fitbit folks were kind enough to replace it anyway once I expressed my displeasure. I'd haggle with them a bit before going the DIY route but I'm definitely keeping my old one for spare parts. Hopefully someone will point out an aftermarket battery source before I need to do that.

fragmasterflash - Replica

The screws in mine were Torx T-2, not T-3.

Jake McIvor - Replica

The button is stuck in my ChargeHR. I bought the T3 screwdriver and it is too big. Either the screws are T2 or my screwdriver is too much imprecise.

Anyone fixed a stuck button?

Anderson Maciel - Replica

it definitely not T3 must be T2

Marc Frederick - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 21

Tutti i Tempi: 23,952