Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Panoramica Video

Introduzione

As a facial-recognition technology initially launched on iPhone X, Face ID has been applied to latest iPhones, including iPhone XS,XS Max and XR. With this amazing Face ID system, users can unlock their devices by scanning and confirming facial identity. Whether you are wearing a hat, putting on glasses or you are in the dark.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo iPhone X, usa il nostro manuale di assistenza.

  1. There are 8 components packed into the front of the phone. Infrared Camera; Flood Illuminator; Proximity Sensor; Ambient Light Sensor; Speaker; Microphone; Front Camera; Dot Projector; The infrared camera, the dot projector and the front camera are located on the back glass assembly.
    • There are 8 components packed into the front of the phone. Infrared Camera; Flood Illuminator; Proximity Sensor; Ambient Light Sensor; Speaker; Microphone; Front Camera; Dot Projector;

    • The infrared camera, the dot projector and the front camera are located on the back glass assembly.

    • The flood illuminator, the proximity sensor, the ambient light sensor, the speaker and the microphone are located on the display assembly.

    • Please be careful when disassembling or repairing the phone. Damage of any component will cause Face ID failure.

    • Please be noted that there is a slot on the display assembly. When assembling the phone, the fold of the speaker flex cable should be placed correspondingly in the slot to prevent the cable from getting broken. Which will also result in the failure of Face ID.

  2. We can see that there are many holes on the flood illuminator that are arranged in a matrix of 11×11.
    • We can see that there are many holes on the flood illuminator that are arranged in a matrix of 11×11.

    • The chip is connected to the circuit board with the help of gold wires.

    • Once water damaged, these holes can be blocked. And you will be faced up with Face ID failure.

  3. Chip 1 is an unencrypted chip.
    • Chip 1 is an unencrypted chip.

    • Chip 2 is the flood illuminator. Chip 3 and Chip 4 are proximity sensors that are responsible for receiving and transmitting respectively.

    • Independent of each other, the three chips are indispensable.

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. The outer layer of the dot projector is sealed with resin and protected by metal welding techniques.
    • The outer layer of the dot projector is sealed with resin and protected by metal welding techniques.

    • Pay attention to these welding points. They can easily fall off once the phone is dropped. And once off, they cannot be restored.

    • Once the dot projector has been detached, we can see a crystal that looks just like a diamond lens.

  6. The chip on the left is used to store data, whereas the chip on the right side acts just like a projector. Since necessary power supply is needed for chip on the right side to work normally, once water damaged, circuits here are most likely to get short. Which can also result in Face ID not working.
    • The chip on the left is used to store data, whereas the chip on the right side acts just like a projector.

    • Since necessary power supply is needed for chip on the right side to work normally, once water damaged, circuits here are most likely to get short. Which can also result in Face ID not working.

    • And please be noted that the chip is exposed without black adhesive seal. So it can be easily damaged once water-damaged or dropped. What’s more, it also can not be restored once damaged.

  7. We can see that there is a concave lens and a convex lens on the crystal. And the two are made of glass. Once dropped, Face ID can also be affected.
    • We can see that there is a concave lens and a convex lens on the crystal. And the two are made of glass. Once dropped, Face ID can also be affected.

  8. Judging by what we have learned during the disassembling, main circuits of the Face ID are exposed. Once water damaged or exposed to a relatively humid environment, there might be electricity leakage or short-circuit problem that can result in Face ID failure.
    • Judging by what we have learned during the disassembling, main circuits of the Face ID are exposed. Once water damaged or exposed to a relatively humid environment, there might be electricity leakage or short-circuit problem that can result in Face ID failure.

    • What’s more, most of the Face ID parts are made of glass. Once dropped, Face ID is most likely to be unavailable.

Phryne

Membro da: 17/11/2019

8.208 Reputazione

63 Guide realizzate

Brilliant! keep up with your good work.

HAKU_LYU - Replica

Thanks for your support!

Phryne -

I send my iPhone for repair bcos not able to activate but instead my Face ID has problems now

Vian - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 22

Ultimi 7 Giorni: 202

Ultimi 30 Giorni: 932

Tutti i Tempi: 5,623