Salta al contenuto principale

Strumenti necessari in questo Smontaggio

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Dualshock 2, usa il nostro manuale di assistenza.

  1. On the back of the controller there is screw holes
    • On the back of the controller there is screw holes

    • Using a Philip Screw driver remove the screws

  2. Using a pry tool separate the two controller pieces Using a pry tool separate the two controller pieces Using a pry tool separate the two controller pieces
    • Using a pry tool separate the two controller pieces

  3. First remove the buttons Most of my buttons fell off. Then left up on the sensor and set it aside. Most of my buttons fell off. Then left up on the sensor and set it aside.
    • First remove the buttons

    • Most of my buttons fell off. Then left up on the sensor and set it aside.

  4. When I lifted the controller out of the chassis one of the dual shock motors fell off it soldering. I removed the other one. When I lifted the controller out of the chassis one of the dual shock motors fell off it soldering. I removed the other one.
    • When I lifted the controller out of the chassis one of the dual shock motors fell off it soldering. I removed the other one.

  5. What you are left with
    • What you are left with

zachary

Membro da: 10/01/2015

775 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 40

Tutti i Tempi: 6,477